EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Structural Design of a Large-Scale 3D-Printed High-Altitude Propeller: Methodology and Experimental Validation

Ahmed Malim, Nikolaos Mourousias, Benoît G. Marinus, Tim De Troyer

Aerospace · 07.03.2023 · 10 (3) · 256

DOI: 10.3390/aerospace10030256 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Aerospace, online erschienen am 07.03.2023. Verfasst von Ahmed Malim und 3 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Belgian Royal Higher Institute for Defence.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents an original approach to the structural design and analysis of a 3D-printed thermoplastic-core propeller blade for high-altitude UAVs. A macroscale linear isotropic numerical model for the behavior of 3D-printed parts (in Tough PLA, as well as ABS) is fed with values from tensile and bending testing on standard specimens (ISO 527-2/1A and ASTM D5023) before validation by experiments on a representative scaled substitute blade and blade root. The influence of printing parameters, such as material, layer thickness, and raster orientation, is also addressed, as well as variability between prints. To conclude on the validity of the present methodology for complex shapes, a validation of the numerical results with experiments was performed on a scaled 3D-printed twisted blade. The presented macroscale approach to 3D-printed materials was able to predict tensile and bending deformation with good accuracy compared to previously published micro- or meso-scale approaches since it is built from systematic tensile and bending testing on standard specimens to representative blade assemblies. It provides a reliable digital twin for the early design stages of 3D-printed propeller blades. As a proof-of-concept, the validated methodology was then used to design and numerically analyze a large-scale blade using steady one-way Fluid-Structure Interaction in take-off and cruise conditions. The computed stress levels in the blade structure were within safe margins, thereby proving the feasibility of the 3D printing of full-scale propeller blades for high-altitude platforms.

Förderung

  • Belgian Royal Higher Institute for Defence

Zitieren

APA

Malim, A., Mourousias, N., Marinus, B. G., & Troyer, T. D. (2023). Structural Design of a Large-Scale 3D-Printed High-Altitude Propeller: Methodology and Experimental Validation. Aerospace, 10(3), 256. https://doi.org/10.3390/aerospace10030256

Vancouver

Malim A, Mourousias N, Marinus BG, Troyer TD. Structural Design of a Large-Scale 3D-Printed High-Altitude Propeller: Methodology and Experimental Validation. Aerospace. 2023;10(3):256. doi:10.3390/aerospace10030256

BibTeX
@article{Malim2023,
  author = {Malim, Ahmed and Mourousias, Nikolaos and Marinus, Benoît G. and Troyer, Tim De},
  title = {Structural Design of a Large-Scale 3D-Printed High-Altitude Propeller: Methodology and Experimental Validation},
  journal = {Aerospace},
  year = {2023},
  volume = {10},
  number = {3},
  pages = {256},
  doi = {10.3390/aerospace10030256}
}
Kostenlos starten →