EUVIMEDEUVIMED entdecken
Crossref

Structural performance of large-scale 3D-printed walls subjected to axial compression load

Marcos V. G. Silveira, Juliana S. Wagner, Mohsen Khanverdi, Sreekanta Das

Canadian Journal of Civil Engineering · 01.08.2024 · 51 (8) · 919-933

DOI: 10.1139/cjce-2023-0395 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Canadian Journal of Civil Engineering, erschienen am 01.08.2024. Verfasst von Marcos V. G. Silveira und 3 weiteren Autor:innen. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 41 Literaturangaben. Gefördert von: Canada Mortgage and Housing Corporation, Natural Sciences and Engineering Research Council of Canada.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Despite the growing incorporation of additive manufacturing in the construction industry, a significant gap persists in the availability of design guidelines and comprehensive structural assessments for 3D-printed components. This research employs experimental methods to evaluate the performance of large-scale hollow unreinforced 3D-printed masonry walls under axial compressive load. Furthermore, a design methodology tailored for 3D-printed masonry walls under compressive loads is proposed in compliance with both American and Canadian masonry standards. This methodology is supported by the application of linear elastic 3D finite element analysis. Moreover, supplementary insights into material behavior are garnered through the examination of small specimens extracted from an additional 3D-printed wall. The results reveal that 3D printing reduces stiffness and compressive strength. The 3D-printed infills played an important role in redistributing stress after cracking. All full-scale 3D-printed masonry walls examined in this research exceeded the performance criteria set by the American masonry standard for load-bearing walls.

Förderung

  • Canada Mortgage and Housing Corporation
  • Natural Sciences and Engineering Research Council of Canada

Zitieren

APA

Silveira, M. V. G., Wagner, J. S., Khanverdi, M., & Das, S. (2024). Structural performance of large-scale 3D-printed walls subjected to axial compression load. Canadian Journal of Civil Engineering, 51(8), 919-933. https://doi.org/10.1139/cjce-2023-0395

Vancouver

Silveira MVG, Wagner JS, Khanverdi M, Das S. Structural performance of large-scale 3D-printed walls subjected to axial compression load. Canadian Journal of Civil Engineering. 2024;51(8):919-933. doi:10.1139/cjce-2023-0395

BibTeX
@article{Silveira2024,
  author = {Silveira, Marcos V. G. and Wagner, Juliana S. and Khanverdi, Mohsen and Das, Sreekanta},
  title = {Structural performance of large-scale 3D-printed walls subjected to axial compression load},
  journal = {Canadian Journal of Civil Engineering},
  year = {2024},
  volume = {51},
  number = {8},
  pages = {919--933},
  doi = {10.1139/cjce-2023-0395}
}
Kostenlos starten →