An Experimental Facility with the High-Speed Moving Endwall for Axial Compressor Leakage Flow Research
Aerospace · 25.02.2023 · 10 (3) · 226
DOI: 10.3390/aerospace10030226 ↗Kurz gefasst
Fachartikel in der Zeitschrift Aerospace, online erschienen am 25.02.2023. Verfasst von Hefang Deng und 5 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of China, National Science and Technology Major Project, Shanghai Municipal Education Commission.
Abstract (Originalsprache)
The moving endwall has a great influence on the development and stability of axial compressor leakage flow. This paper presents a novel experimental facility with a high-speed moving endwall for studying axial compressor leakage flow. The uniqueness of the design concept is that using a large disk simulates the high-speed moving endwall. When R/Cx = 16, theoretical analysis shows that the maximum linear velocity difference is about 2.5% while the maximum axial velocity difference of the mid-three passages is less than 5%. Single-passage simulations show that the disk radius of R/Cx = 16 can achieve an acceptable accuracy in terms of static pressure, total pressure, and density flow. Seven-passage simulations confirm that the mid-three passages have small errors from the axial velocity difference. Subsequently, preliminary experimental results obtained from the experimental facility are presented. The results reveal that the moving endwall significantly changes the distributions of the total pressure loss and static pressure coefficient. The relative difference in the averaged total pressure loss between the experiment and CFD is 11.33% and 7.69% for the static and moving endwall, respectively. It is expected that the experimental facility will make more useful contributions to the understanding of axial compressor leakage flow in the future.
Förderung
- Natural Science Foundation of China
- National Science and Technology Major Project
- Shanghai Municipal Education Commission
- United Innovation Center (UIC) of Aerothermal Technologies for Turbomachinery
- the Innovation Fund from the Engineering Research Center of Aerospace Science and Technology, Ministry of Education
Zitieren
APA
Deng, H., Xia, K., Teng, J., Qiang, X., Zhu, M., & Lu, S. (2023). An Experimental Facility with the High-Speed Moving Endwall for Axial Compressor Leakage Flow Research. Aerospace, 10(3), 226. https://doi.org/10.3390/aerospace10030226
Vancouver
Deng H, Xia K, Teng J, Qiang X, Zhu M, Lu S. An Experimental Facility with the High-Speed Moving Endwall for Axial Compressor Leakage Flow Research. Aerospace. 2023;10(3):226. doi:10.3390/aerospace10030226
BibTeX
@article{Deng2023,
author = {Deng, Hefang and Xia, Kailong and Teng, Jinfang and Qiang, Xiaoqing and Zhu, Mingmin and Lu, Shaopeng},
title = {An Experimental Facility with the High-Speed Moving Endwall for Axial Compressor Leakage Flow Research},
journal = {Aerospace},
year = {2023},
volume = {10},
number = {3},
pages = {226},
doi = {10.3390/aerospace10030226}
}
EUVIMED