Characteristics of tip leakage flow inside the tip clearance of an axial compressor
Physics of Fluids · 01.03.2025 · 37 (3)
DOI: 10.1063/5.0256703 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Fluids, online erschienen am 05.03.2025. Verfasst von Zhihong Liao und 5 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 48 Literaturangaben. Gefördert von: National Science and Technology Major Project, The Provincial Natural Science Foundation Key Project.
Abstract (Originalsprache)
The study of flow field characteristics inside the tip clearance is essential for understanding tip leakage flow (TLF) generation mechanisms. This paper investigates the TLF flow field in a single-stage axial compressor using a particle image velocimetry visualization system, alongside proper orthogonal decomposition and omega vortex identification methods, to analyze the flow at the mid-axial cross section under varying rotational speeds. The results reveal that the time-averaged flow field inside the clearance can be divided into four distinct regions, largely unaffected by speed variations: the high-speed region at the blade leading edge, the diverting and steering region of TLF, the TLF and main stream convergence region, and the trailing edge low-velocity region. Notably, two distinct directions of TLF are observed. At the blade leading edge, TLF flows directly from the upstream field to the lower blade, with a maximum velocity of approximately 2.2 times that of the main flow. Between 30% and 40% of the blade length, radial vortices dominate the diverting and steering of the main flow, forming a precessing vortex structure. Subsequently, TLF from the pressure side accelerates upstream, intersecting with the main flow to form a low-velocity tip leakage vortex region, obstructing the upstream flow. As rotational speed increases, the diverging and steering region shifts downward, and the disturbances in the internal and upstream flow fields further intensify. Furthermore, TLF from the downstream field bypassing the tip is observed between blades. These findings offer valuable data to improve understanding and optimize control strategies of TLF.
Förderung
- National Science and Technology Major Project
- The Provincial Natural Science Foundation Key Project
Zitieren
APA
Liao, Z., Xue, Z., Shen, J., Zhou, Y., Jin, Q., & Wu, X. (2025). Characteristics of tip leakage flow inside the tip clearance of an axial compressor. Physics of Fluids, 37(3). https://doi.org/10.1063/5.0256703
Vancouver
Liao Z, Xue Z, Shen J, Zhou Y, Jin Q, Wu X. Characteristics of tip leakage flow inside the tip clearance of an axial compressor. Physics of Fluids. 2025;37(3). doi:10.1063/5.0256703
BibTeX
@article{Liao2025,
author = {Liao, Zhihong and Xue, Zhiliang and Shen, Jianqi and Zhou, Yonggang and Jin, Qiwen and Wu, Xuecheng},
title = {Characteristics of tip leakage flow inside the tip clearance of an axial compressor},
journal = {Physics of Fluids},
year = {2025},
volume = {37},
number = {3},
doi = {10.1063/5.0256703}
}
EUVIMED