EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructural Evolution and Mechanical Properties of Ti2AlNb/GH99 Superalloy Brazed Joints Using TiZrCuNi Amorphous Filler Alloy

Junjie Cai, Shengpeng Hu, Hongbing Liu, Danyang Lin, Wei Fu, Xiaoguo Song

Aerospace · 10.01.2023 · 10 (1) · 73

DOI: 10.3390/aerospace10010073 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Aerospace, online erschienen am 10.01.2023. Verfasst von Junjie Cai und 5 weiteren Autor:innen. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Taishan Scholars Foundation of Shandong Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Dissimilar materials brazing of Ti2AlNb alloy to GH99 superalloy is of great pragmatic importance in the aerospace field, especially the lightweight space aircraft components manufacturing. In this work, TiZrCuNi amorphous filler alloy was used as brazing filler, and experiments were carried out at different brazing temperatures and times to investigate the changes in interfacial structures and properties of the joints. The typical interfacial microstructure was Ti2AlNb alloy/B2/β/Ti2Ni (Al, Nb) + B2/β + (Ti, Zr)2(Ni, Cu) + (Ti, Zr)(Ni, Cu)/(Cr, Ni, Ti) solid solution + (Ni, Cr) solid solution/GH99 superalloy when being brazed at 1000 °C for 8 min. The interfacial microstructure of the joints was influenced by diffusion and reaction between the filler alloy and the parent metal. The prolongation of brazing process parameters accelerated the diffusion and reaction of the liquid brazing alloy into both parent metals, which eventually led to the aggregation of (Ti, Zr)2(Ni, Cu) brittle phase and increased thickness of Ti2Ni (Al, Nb) layer. According to fracture analyses, cracks began in the Ti2Ni (Al, Nb) phase and spread with it as well as the (Ti, Zr)2(Ni, Cu) phase. The joints that were brazed at 1000 °C for 8 min had a maximum shear strength of ~216.2 MPa. Furthermore, increasing the brazing temperature or extending the holding time decreased the shear strength due to the coarse Ti2Ni (Al, Nb) phase and the continuous (Ti, Zr)2(Ni, Cu) phase.

Förderung

  • National Natural Science Foundation of China
  • Taishan Scholars Foundation of Shandong Province

Zitieren

APA

Cai, J., Hu, S., Liu, H., Lin, D., Fu, W., & Song, X. (2023). Microstructural Evolution and Mechanical Properties of Ti2AlNb/GH99 Superalloy Brazed Joints Using TiZrCuNi Amorphous Filler Alloy. Aerospace, 10(1), 73. https://doi.org/10.3390/aerospace10010073

Vancouver

Cai J, Hu S, Liu H, Lin D, Fu W, Song X. Microstructural Evolution and Mechanical Properties of Ti2AlNb/GH99 Superalloy Brazed Joints Using TiZrCuNi Amorphous Filler Alloy. Aerospace. 2023;10(1):73. doi:10.3390/aerospace10010073

BibTeX
@article{Cai2023,
  author = {Cai, Junjie and Hu, Shengpeng and Liu, Hongbing and Lin, Danyang and Fu, Wei and Song, Xiaoguo},
  title = {Microstructural Evolution and Mechanical Properties of Ti2AlNb/GH99 Superalloy Brazed Joints Using TiZrCuNi Amorphous Filler Alloy},
  journal = {Aerospace},
  year = {2023},
  volume = {10},
  number = {1},
  pages = {73},
  doi = {10.3390/aerospace10010073}
}
Kostenlos starten →