EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Wettability and microstructural evolution of copper filler in W and EUROFER brazed joints

Ignacio Izaguirre, Javier de Prado, María Sánchez, Alejandro Ureña

The International Journal of Advanced Manufacturing Technology · 2024-04 · 131 (12) · 5905-5921

DOI: 10.1007/s00170-024-13338-9 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 05.03.2024. Verfasst von Ignacio Izaguirre und 3 weiteren Autor:innen. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EUROfusion, Universidad Rey Juan Carlos.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In terms of wettability, active systems are characterized by a reduction in interfacial energy as the time at specific conditions is increased. This article aims to investigate the evolution of wettability and microstructure, which undergoes a critical transformation at temperatures and dwell times near brazing conditions due to their significant impact on resultant mechanical properties. The objective is to enhance wettability and prevent the formation of different phases that can occur rapidly within the brazing window conditions. Up to 1105 °C, complete fusion of the filler does not occur. However, once it happens, the expansion of the copper filler in EUROFER increases up to 400%, and the contact angle reduces from 100° to 10°, indicating an active wetting behavior. On the other hand, when copper is used with tungsten, an inert behavior is observed, maintaining the contact angle around 70°. Brazed joints carried out under the most promising wetting conditions demonstrated that at 1110 °C-1 min, various phenomena began to occur. This includes solid-state diffusion of copper in the EUROFER, following the austenitic grain boundaries, and partial dissolution of Fe in the copper braze. Increasing the brazing time from 2 to 5 min achieved high interfacial adhesion properties and controlled the diffusion layer and Fe-rich band formed at the W-braze interface, resulting in the best mechanical results (295 MPa).

Förderung

  • EUROfusion
  • Universidad Rey Juan Carlos

Zitieren

APA

Izaguirre, I., Prado, J. D., Sánchez, M., & Ureña, A. (2024). Wettability and microstructural evolution of copper filler in W and EUROFER brazed joints. The International Journal of Advanced Manufacturing Technology, 131(12), 5905-5921. https://doi.org/10.1007/s00170-024-13338-9

Vancouver

Izaguirre I, Prado JD, Sánchez M, Ureña A. Wettability and microstructural evolution of copper filler in W and EUROFER brazed joints. The International Journal of Advanced Manufacturing Technology. 2024;131(12):5905-5921. doi:10.1007/s00170-024-13338-9

BibTeX
@article{Izaguirre2024,
  author = {Izaguirre, Ignacio and Prado, Javier de and Sánchez, María and Ureña, Alejandro},
  title = {Wettability and microstructural evolution of copper filler in W and EUROFER brazed joints},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2024},
  volume = {131},
  number = {12},
  pages = {5905--5921},
  doi = {10.1007/s00170-024-13338-9}
}
Kostenlos starten →