EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of a Directional Vibrator Using Shape-Memory Alloy Wires

Yuto Kawahara, Renke Liu, Hideyuki Sawada

Actuators · 08.07.2026 · 15 (7) · 385

DOI: 10.3390/act15070385 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Actuators, online erschienen am 08.07.2026. Verfasst von Yuto Kawahara und 2 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: JSPS KAKENHI.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Haptic feedback has attracted significant attention in virtual reality (VR), augmented reality (AR), and teleoperation because it can provide rich tactile information of an object through skin without increasing visual load. Among the many tactile presentation methods, vibration is the most widely used, and numerous vibration actuators have been incorporated into tactile displays. For directional control, attempts have been made to generate directional acceleration within a two-dimensional plane using a single device, but the reported device produces a single-shot impact rather than continuous vibration and offers limited control of the acceleration magnitude. To address this, we focus on a shape-memory alloy (SMA) wire. The wire contracts when heated by an applied current and returns to its original length when the current is stopped. Such repeated contraction and recovery generate vibration in synchronization with a pulse current. This paper proposes a vibrator that suspends a moving part with four SMA wires to generate two-dimensional directional acceleration with a single compact device. Through driving experiments, we show that the device generates acceleration aligned with the axis of each of eight target directions spaced at 45° intervals, and that the magnitude of the acceleration can be adjusted through the duty ratio at a fixed driving frequency. The perceptual evaluation of the presented direction is left for future work.

Förderung

  • JSPS KAKENHI

Zitieren

APA

Kawahara, Y., Liu, R., & Sawada, H. (2026). Development of a Directional Vibrator Using Shape-Memory Alloy Wires. Actuators, 15(7), 385. https://doi.org/10.3390/act15070385

Vancouver

Kawahara Y, Liu R, Sawada H. Development of a Directional Vibrator Using Shape-Memory Alloy Wires. Actuators. 2026;15(7):385. doi:10.3390/act15070385

BibTeX
@article{Kawahara2026,
  author = {Kawahara, Yuto and Liu, Renke and Sawada, Hideyuki},
  title = {Development of a Directional Vibrator Using Shape-Memory Alloy Wires},
  journal = {Actuators},
  year = {2026},
  volume = {15},
  number = {7},
  pages = {385},
  doi = {10.3390/act15070385}
}
Kostenlos starten →