Comparison of Torque Characteristics in Interior Permanent Magnet Synchronous Machine with Conventional and Pseudo Step-Skewing Techniques
Actuators · 02.06.2026 · 15 (6) · 311
DOI: 10.3390/act15060311 ↗Kurz gefasst
Fachartikel in der Zeitschrift Actuators, online erschienen am 02.06.2026. Verfasst von Jian Wang und 3 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
In high-performance applications of interior permanent magnet synchronous machines, critical emphasis is laid on torque characteristics of the design, especially average output torque and torque ripple. Consequently, various techniques of rotor step-skewing have been widely proposed and applied to enhance these performance metrics. This paper investigates the effects of conventional and novel pseudo-rotor step-skewing techniques on the torque characteristics of an interior permanent magnet synchronous machine. Using both 2D and 3D finite element analysis, the study provides a comprehensive performance comparison of these two methods. As the results demonstrate, while both techniques achieve significant reductions in torque ripple under normal load conditions with only a marginal decrease in average output torque, their effectiveness is compromised under increased load as a consequence of magnetic saturation. However, the proposed pseudo-step-skewing technique yields a marginal gain in average torque over its conventional counterpart, attributable to the suppression of axial inter-step flux leakage. The findings are experimentally validated, underpinning that the proposed method can be an effective alternative to the conventional one, primarily due to its ease of rotor assembly.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Wang, J., Wang, E., Yang, H., & Xu, Z. (2026). Comparison of Torque Characteristics in Interior Permanent Magnet Synchronous Machine with Conventional and Pseudo Step-Skewing Techniques. Actuators, 15(6), 311. https://doi.org/10.3390/act15060311
Vancouver
Wang J, Wang E, Yang H, Xu Z. Comparison of Torque Characteristics in Interior Permanent Magnet Synchronous Machine with Conventional and Pseudo Step-Skewing Techniques. Actuators. 2026;15(6):311. doi:10.3390/act15060311
BibTeX
@article{Wang2026,
author = {Wang, Jian and Wang, Enlong and Yang, Huan and Xu, Zhike},
title = {Comparison of Torque Characteristics in Interior Permanent Magnet Synchronous Machine with Conventional and Pseudo Step-Skewing Techniques},
journal = {Actuators},
year = {2026},
volume = {15},
number = {6},
pages = {311},
doi = {10.3390/act15060311}
}
EUVIMED