EUVIMEDEUVIMED entdecken
Crossref

Combined Design of Targeted Rotor-Step Skewing Schemes for Modulated Vibration Mitigation in Interior Permanent Magnet Synchronous Motors

Daolu Li, Shengquan Li, Fang Zhang, Lijing Wang, Zihao Bian

IEEE Transactions on Transportation Electrification · 2026-08 · 12 (4) · 6151-6164

DOI: 10.1109/tte.2026.3684306 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Transportation Electrification, 2026-08. Verfasst von Daolu Li und 4 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents a combined design of targeted rotor-step skewing schemes aimed at effectively mitigating modulated vibration induced by high-order radial force in interior permanent magnet synchronous motors (IPMSMs). Initially, the electromagnetic (EM) vibration behavior of a 36-slot/six-pole IPMSM is examined, and the dominant vibration at a specific frequency is identified. Subsequently, analytical models for vibration sources, including radial force and bending moment, are established, and their dependence on rotor circumferential position is analyzed. Then, the rotor is divided into a constant number of axial segments, and step-skewed configurations are applied. By employing various combinations of skewing mode and skewing angle, simultaneous minimization of the dominant radial force and bending moment is achieved. Consequently, the optimal skewing angle is determined for each skewing mode, directly specifying the targeted rotor-step skewing schemes. Among these schemes, two types with optimal vibration performance and lower torque loss are selected. Given that they share the same minimum circumferential angle difference among all segments, a novel combined design approach is proposed. Finite element (FE) calculations demonstrate that the combined model achieves superior vibration suppression in comparison with both individual targeted designs and other combined configurations. Experimental results further validate the effectiveness of the proposed method in significantly reducing modulated vibration in IPMSMs.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Li, D., Li, S., Zhang, F., Wang, L., & Bian, Z. (2026). Combined Design of Targeted Rotor-Step Skewing Schemes for Modulated Vibration Mitigation in Interior Permanent Magnet Synchronous Motors. IEEE Transactions on Transportation Electrification, 12(4), 6151-6164. https://doi.org/10.1109/tte.2026.3684306

Vancouver

Li D, Li S, Zhang F, Wang L, Bian Z. Combined Design of Targeted Rotor-Step Skewing Schemes for Modulated Vibration Mitigation in Interior Permanent Magnet Synchronous Motors. IEEE Transactions on Transportation Electrification. 2026;12(4):6151-6164. doi:10.1109/tte.2026.3684306

BibTeX
@article{Li2026,
  author = {Li, Daolu and Li, Shengquan and Zhang, Fang and Wang, Lijing and Bian, Zihao},
  title = {Combined Design of Targeted Rotor-Step Skewing Schemes for Modulated Vibration Mitigation in Interior Permanent Magnet Synchronous Motors},
  journal = {IEEE Transactions on Transportation Electrification},
  year = {2026},
  volume = {12},
  number = {4},
  pages = {6151--6164},
  doi = {10.1109/tte.2026.3684306}
}
Kostenlos starten →