A Reconfigurable Dual-Motor Compound-Planetary Electric Drive Axle for an Expanded Torque-Vectoring Envelope
Actuators · 08.05.2026 · 15 (5) · 268
DOI: 10.3390/act15050268 ↗Kurz gefasst
Fachartikel in der Zeitschrift Actuators, online erschienen am 08.05.2026. Verfasst von Jianyuan Liu und 7 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Special Funds for the Cultivation of Guangdong College Students’ Scientific and Technological Innovation.
Abstract (Originalsprache)
Dual-motor electric drive axles (e-axles) can realize basic torque vectoring through motor-torque allocation. However, without an inter-wheel power-transfer path, they still face structural limitations under motor torque–speed envelopes and severe left–right adhesion asymmetry. To address this issue, this paper proposes a reconfigurable dual-motor e-axle based on fixed-carrier compound planetary gear trains and two cross-axle clutches. By switching between controlled-slip and lock-coupled states, the proposed topology creates a switchable inter-wheel power-transfer path. As a result, it enhances yaw-rate regulation capability under high-adhesion conditions and improves escape capability under severe adhesion asymmetry. A unified kinematic–static analytical framework is established to derive closed-form capability boundaries and compact structural indices for parameter matching. Vehicle-level co-simulation on a representative rear-wheel-drive platform is then carried out for validation. Under severe split-μ conditions, the peak high-adhesion wheel torque increases from 241.72 to 695.57 N·m, and the escape time decreases from 0.43 to 0.19 s. In a representative high-adhesion step-steer case, the mean yaw-rate tracking error is reduced from 6.75 to 0.20 deg/s, while the mean differential wheel torque reaches 1.83 times that of the baseline mode. The other high-adhesion cases show the same trend. These results verify the vehicle-dynamics significance and engineering feasibility of the proposed architecture.
Förderung
- Special Funds for the Cultivation of Guangdong College Students’ Scientific and Technological Innovation
Zitieren
APA
Liu, J., Tian, M., Lyu, H., Xu, D., Zhen, Z., Li, D., Hong, J., & Gao, B. (2026). A Reconfigurable Dual-Motor Compound-Planetary Electric Drive Axle for an Expanded Torque-Vectoring Envelope. Actuators, 15(5), 268. https://doi.org/10.3390/act15050268
Vancouver
Liu J, Tian M, Lyu H, Xu D, Zhen Z, Li D, et al. A Reconfigurable Dual-Motor Compound-Planetary Electric Drive Axle for an Expanded Torque-Vectoring Envelope. Actuators. 2026;15(5):268. doi:10.3390/act15050268
BibTeX
@article{Liu2026,
author = {Liu, Jianyuan and Tian, Mengjian and Lyu, Haoyang and Xu, Delin and Zhen, Zhouyi and Li, Dehai and Hong, Jinlong and Gao, Bingzhao},
title = {A Reconfigurable Dual-Motor Compound-Planetary Electric Drive Axle for an Expanded Torque-Vectoring Envelope},
journal = {Actuators},
year = {2026},
volume = {15},
number = {5},
pages = {268},
doi = {10.3390/act15050268}
}
EUVIMED