EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Dual-Motor Cross-Coupled Synchronous Control of Flexographic Printing Pressure Integrating Hertz Theory and Fuzzy PI

Shuqin Wu, Jiashu Huang, Shuyuan Wei, Jialin Li, Jiajie Kang, Qiang Da, Yu Yao, Xinru Dong, Shubo Shi, Chengwen Chai

Actuators · 10.03.2026 · 15 (3) · 160

DOI: 10.3390/act15030160 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Actuators, online erschienen am 10.03.2026. Verfasst von Shuqin Wu und 9 weiteren Autor:innen. Die Arbeit nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key Lab of Intelligent and Green Flexographic Printing, National Press and Publication Administration.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study addresses key challenges in high-precision industrial motion control, including dynamic load disturbances, nonlinear parameter coupling, and degradation in synchronization accuracy. A dual-motor cross-coupled synchronous control strategy is proposed, integrating Hertzian contact theory with an adaptive fuzzy PI control algorithm. First, a precise pressure measurement model for the printing contact zone is established based on Hertzian contact theory. The model quantitatively characterizes the relationship between structural parameters and pressure distribution. Key parameters include cylinder radius and plate thickness. This provides a theoretical foundation for precise regulation. Subsequently, a fuzzy PI controller with parameter self-tuning capability is incorporated into the motor speed loop, enabling real-time adjustment of control parameters to effectively compensate for system nonlinearities and time-varying disturbances. Furthermore, a cross-coupled synchronization architecture is designed to enable bidirectional compensation between the two motors, significantly improving synchronization accuracy under complex operating conditions. Simulations were performed in MATLAB/Simulink. The tests covered typical operational scenarios, including load start-up, single-motor disturbance, and multi-disturbance conditions. The results demonstrate that the proposed system achieves high performance: dual-motor speed synchronization accuracy reaches 99.5%; the response time for disturbance compensation is within 0.3 s; and printing-pressure fluctuation is confined to ±0.8%. This performance represents a 62.5% improvement in stability over conventional single-motor control systems. This research not only resolves the long-standing issue of pressure non-uniformity in flexographic printing but also provides a generalizable framework for multi-motor synchronous control in precision manufacturing. The findings offer substantial academic insight and practical value for advancing intelligent industrial measurement and control technologies.

Förderung

  • Key Lab of Intelligent and Green Flexographic Printing
  • National Press and Publication Administration

Zitieren

APA

Wu, S., Huang, J., Wei, S., Li, J., Kang, J., Da, Q., Yao, Y., Dong, X., Shi, S., & Chai, C. (2026). Research on Dual-Motor Cross-Coupled Synchronous Control of Flexographic Printing Pressure Integrating Hertz Theory and Fuzzy PI. Actuators, 15(3), 160. https://doi.org/10.3390/act15030160

Vancouver

Wu S, Huang J, Wei S, Li J, Kang J, Da Q, et al. Research on Dual-Motor Cross-Coupled Synchronous Control of Flexographic Printing Pressure Integrating Hertz Theory and Fuzzy PI. Actuators. 2026;15(3):160. doi:10.3390/act15030160

BibTeX
@article{Wu2026,
  author = {Wu, Shuqin and Huang, Jiashu and Wei, Shuyuan and Li, Jialin and Kang, Jiajie and Da, Qiang and Yao, Yu and Dong, Xinru and Shi, Shubo and Chai, Chengwen},
  title = {Research on Dual-Motor Cross-Coupled Synchronous Control of Flexographic Printing Pressure Integrating Hertz Theory and Fuzzy PI},
  journal = {Actuators},
  year = {2026},
  volume = {15},
  number = {3},
  pages = {160},
  doi = {10.3390/act15030160}
}
Kostenlos starten →