EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dual-Motor Position Control Based on a Synchronous State Observer

Li Lei, Qingyang Wang, Yesong Li

Machines · 11.06.2026 · 14 (6) · 681

DOI: 10.3390/machines14060681 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 11.06.2026. Verfasst von Li Lei und 2 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Science and Technology of Hubei Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-end vertical five-axis machining centers commonly adopt dual-motor direct-drive configurations for their cradle-type A-axis to improve dynamic performance; however, this approach introduces control challenges in balancing counteracting torque and synchronization accuracy due to high-rigidity coupling. To address this issue, this study presents a novel error compensation control strategy based on a synchronous state observer. First, a system dynamic model incorporating dual-axis coupling effects is developed to systematically investigate the coupling mechanism between synchronization error and counteracting torque. Based on this model, a synchronous state observer is designed, which achieves real-time reconstruction and feedforward compensation of synchronization disturbances induced by factors such as transmission parameter mismatches and inter-axis torque imbalance, thereby enabling coordinated control of high-precision position synchronization and torque balance. The effectiveness of the proposed method is verified through simulation and experiments conducted on a VMC630 vertical five-axis machining center. Results show that under various speed and acceleration conditions, the maximum position synchronization error remained below 6.3 × 10−4∘, with comparable convergence performance; the current deviation between the dual motors was constrained to within ±0.25A, demonstrating effective mitigation of counteracting torque. In machining tests of S-shaped specimens, all measured contour deviations fell within the ±0.060 mm tolerance range, and the specimens exhibited excellent contour consistency and surface quality. These results validate the proposed strategy’s status as an engineering-viable solution for precision motion control in high-rigidity coupled dual-motor systems.

Förderung

  • Department of Science and Technology of Hubei Province

Zitieren

APA

Lei, L., Wang, Q., & Li, Y. (2026). Dual-Motor Position Control Based on a Synchronous State Observer. Machines, 14(6), 681. https://doi.org/10.3390/machines14060681

Vancouver

Lei L, Wang Q, Li Y. Dual-Motor Position Control Based on a Synchronous State Observer. Machines. 2026;14(6):681. doi:10.3390/machines14060681

BibTeX
@article{Lei2026,
  author = {Lei, Li and Wang, Qingyang and Li, Yesong},
  title = {Dual-Motor Position Control Based on a Synchronous State Observer},
  journal = {Machines},
  year = {2026},
  volume = {14},
  number = {6},
  pages = {681},
  doi = {10.3390/machines14060681}
}
Kostenlos starten →