EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A virtual-center spherical joint for reconfigurable truss robot systems

Adam Rose, Ivyann O. Running, Eli Francom, Simon Charles, Bryce Parkinson, Larry L. Howell, Nathan Usevitch

Frontiers in Robotics and AI · 20.11.2026 · 13

DOI: 10.3389/frobt.2026.1968425 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Frontiers in Robotics and AI, online erschienen am 20.11.2026. Verfasst von Adam Rose und 6 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work introduces and models the Virtual-Center Serial Linkage Spherical Joint (VCSL), a modular spherical joint design for reconfigurable truss robots that facilitates large changes in shape while also allowing the robot to be reconfigured into different structures. The VCSL is a passive linkage composed of serially pinned panels. The axis of each pin joint intersects at a single virtual center of rotation, regardless of panel orientation. This enables all degrees of freedom of a spherical joint, allowing large three-dimensional motion while maintaining the kinematic and structural simplicity of the truss. Clevis-pin connection to truss elements allows for quick assembly and disassembly so the truss can be easily reconfigured. At the opposite end the joint arm connects to a central spherical node, which unifies all intersecting joint arms and enforces a shared virtual center of rotation. Several passive spherical joints can be connected at the same spherical node, enabling the construction of complex truss structures. The range of motion of the VCSL is analyzed using both forward and inverse kinematic models. The forward kinematic model uses geometric parameters to generate a three-dimensional representation of the joint workspace. The proposed inverse kinematic model uses those same design parameters to determine the allowable axial rotation at each joint endpoint within the workspace. The forward kinematic model is validated against physical joint behavior using motion capture, while the inverse kinematic model characterizes the available axial rotation throughout the reachable workspace. The data suggest that the models reasonably represent joint behavior. For the specific joint configuration tested in this work, the forward kinematic model predicted 38.68% spherical-surface coverage, compared with 33.38% measured by motion capture, and the joint was successfully integrated into a six-unit inflatable truss robot.

Zitieren

APA

Rose, A., Running, I. O., Francom, E., Charles, S., Parkinson, B., Howell, L. L., & Usevitch, N. (2026). A virtual-center spherical joint for reconfigurable truss robot systems. Frontiers in Robotics and AI, 13. https://doi.org/10.3389/frobt.2026.1968425

Vancouver

Rose A, Running IO, Francom E, Charles S, Parkinson B, Howell LL, et al. A virtual-center spherical joint for reconfigurable truss robot systems. Frontiers in Robotics and AI. 2026;13. doi:10.3389/frobt.2026.1968425

BibTeX
@article{Rose2026,
  author = {Rose, Adam and Running, Ivyann O. and Francom, Eli and Charles, Simon and Parkinson, Bryce and Howell, Larry L. and Usevitch, Nathan},
  title = {A virtual-center spherical joint for reconfigurable truss robot systems},
  journal = {Frontiers in Robotics and AI},
  year = {2026},
  volume = {13},
  doi = {10.3389/frobt.2026.1968425}
}
Kostenlos starten →