EUVIMEDEUVIMED entdecken
Crossref

Use of a Reconfigurable Linkage for the Control of Center of Rotation: Application to a 3T3R Spherical Parallel Mechanism

Terence Essomba, Lin-Chieh Hung

Journal of Mechanical Design · 01.08.2026 · 148 (8)

DOI: 10.1115/1.4071482 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Mechanical Design, online erschienen am 08.04.2026. Verfasst von Terence Essomba und 1 weiteren Autor:innen. Die Arbeit nennt 48 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Remote center of motion (RCM) architectures are known to rotate their end effector around a center of rotation (CoR). This characteristic makes them very suitable in the medical field due to the increasing reliance on minimally invasive practices. In many applications, adjusting the position of the CoR is desirable, if not mandatory. A large number of RCM mechanisms have been designed in recent years, but very few of them are capable of controlling the position of their CoR without using a large translational platform. The present study proposes a method to transform classical spherical mechanisms into reconfigurable ones to allow the direct control of their CoR position. A new reconfigurable spherical linkage (RSL) is designed to change its radius and the location of its center. By substituting them for classical spherical links with a specific assembly, new mechanisms are obtained with additional linear mobility for their CoR. This method is applied to the 3-RRR spherical parallel mechanism, which classically generates an RCM with a 3R motion. The new 3-URRRP mechanism with RSL can now achieve a 3T3R motion and control its CoR through the reconfiguration of its linkages. Its inverse kinematic and velocity models are derived, and its singular configurations are identified. A series of simulations is carried out to evaluate its performance in terms of workspace and dexterity.

Zitieren

APA

Essomba, T., & Hung, L. (2026). Use of a Reconfigurable Linkage for the Control of Center of Rotation: Application to a 3T3R Spherical Parallel Mechanism. Journal of Mechanical Design, 148(8). https://doi.org/10.1115/1.4071482

Vancouver

Essomba T, Hung L. Use of a Reconfigurable Linkage for the Control of Center of Rotation: Application to a 3T3R Spherical Parallel Mechanism. Journal of Mechanical Design. 2026;148(8). doi:10.1115/1.4071482

BibTeX
@article{Essomba2026,
  author = {Essomba, Terence and Hung, Lin-Chieh},
  title = {Use of a Reconfigurable Linkage for the Control of Center of Rotation: Application to a 3T3R Spherical Parallel Mechanism},
  journal = {Journal of Mechanical Design},
  year = {2026},
  volume = {148},
  number = {8},
  doi = {10.1115/1.4071482}
}
Kostenlos starten →