EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tool design for low-frequency vibration cutting on surface property

Shogo Nakamura, Kenichi Nakanishi, Kenji Ohara, Yoshikatsu Nakamura, Zongwei Ren, Toru Kizaki, Naohiko Sugita

Frontiers in Manufacturing Technology · 2023

DOI: 10.3389/fmtec.2022.1079127 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Frontiers in Manufacturing Technology, 2023. Verfasst von Shogo Nakamura und 6 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Low-frequency vibration cutting is a machining technology in which chips are broken by applying periodic vibrations along a specific axis. Periodic vibration deteriorates the surface roughness and roundness of the workpiece when compared to without vibration cutting. In this study, the properties of a machined surface under low-frequency vibration were simulated. Based on the simulation results, a tool was designed to reduce the effects of periodic vibration on the surface properties. Actual machining experiments were conducted using the proposed tool to clarify the relationship between tool shape, surface roughness, and roundness under low-frequency vibration. Using the proposed tool on low-frequency vibration cutting, the surface roughness was reduced (from 5.74 µm to .94 µm in Ra and 23.09 µm–6.66 µm in Rz ), average roundness improved (from 4.73 µm to 2.95 µm), and maximum roundness decreased (from 15.34 µm to 3.61 µm) compared with those of the conventional tool.

Zitieren

APA

Nakamura, S., Nakanishi, K., Ohara, K., Nakamura, Y., Ren, Z., Kizaki, T., & Sugita, N. (2023). Tool design for low-frequency vibration cutting on surface property. Frontiers in Manufacturing Technology. https://doi.org/10.3389/fmtec.2022.1079127

Vancouver

Nakamura S, Nakanishi K, Ohara K, Nakamura Y, Ren Z, Kizaki T, et al. Tool design for low-frequency vibration cutting on surface property. Frontiers in Manufacturing Technology. 2023. doi:10.3389/fmtec.2022.1079127

BibTeX
@article{Nakamura2023,
  author = {Nakamura, Shogo and Nakanishi, Kenichi and Ohara, Kenji and Nakamura, Yoshikatsu and Ren, Zongwei and Kizaki, Toru and Sugita, Naohiko},
  title = {Tool design for low-frequency vibration cutting on surface property},
  journal = {Frontiers in Manufacturing Technology},
  year = {2023},
  doi = {10.3389/fmtec.2022.1079127}
}
Kostenlos starten →