Analysis of cutting performance and chip morphology during longitudinal -torsional ultrasonic milling of aluminum honeycomb structures
Frontiers in Mechanical Engineering · 02.06.2026 · 12
DOI: 10.3389/fmech.2026.1833929 ↗Kurz gefasst
Fachartikel in der Zeitschrift Frontiers in Mechanical Engineering, online erschienen am 02.06.2026. Verfasst von Oussama Beldi und 7 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Aluminum honeycomb structures are widely used in aerospace due to their excellent stiffness-to-weight ratio. However, their thin-walled architecture makes them difficult to machine, leading to deformation, material buildup, tool wear, and surface degradation. This study analyzes ultrasonic vibration-assisted milling of aluminum honeycomb structures by combining 3D numerical modeling and experimental validation. A finite element model using Abaqus/Explicit, based on the Johnson–Cook law, is developed to simulate tool-material interactions and chip formation. A parametric analysis was conducted to evaluate the influence of the vibration mode (longitudinal and longitudinal-torsional), vibration amplitude, feed rate, tool inclination angle, and number of teeth. The results show that ultrasonic vibrations significantly improve machining conditions. The longitudinal-torsional mode reduces cutting forces by 10 to 25%, while increasing the vibration amplitude can lead to a reduction of up to 50% for F x and F y and 55% for F z . Furthermore, vibration assistance promotes chip fragmentation, reduces tool-material contact pressure, limits sticking wear, and decreases cell wall deformation, thus contributing to improved surface quality. These results demonstrate the potential of ultrasonic vibration-assisted milling to optimize the machining of honeycomb structures in demanding industrial applications, particularly in the aerospace field.
Zitieren
APA
Beldi, O., Zarrouk, T., Abbadi, A., Ding, W., Salhi, J., Nouari, M., Abbadi, M., & Barboucha, M. (2026). Analysis of cutting performance and chip morphology during longitudinal -torsional ultrasonic milling of aluminum honeycomb structures. Frontiers in Mechanical Engineering, 12. https://doi.org/10.3389/fmech.2026.1833929
Vancouver
Beldi O, Zarrouk T, Abbadi A, Ding W, Salhi J, Nouari M, et al. Analysis of cutting performance and chip morphology during longitudinal -torsional ultrasonic milling of aluminum honeycomb structures. Frontiers in Mechanical Engineering. 2026;12. doi:10.3389/fmech.2026.1833929
BibTeX
@article{Beldi2026,
author = {Beldi, Oussama and Zarrouk, Tarik and Abbadi, Ahmed and Ding, Wenfeng and Salhi, Jamal-Eddine and Nouari, Mohammed and Abbadi, Mohammed and Barboucha, Mohammed},
title = {Analysis of cutting performance and chip morphology during longitudinal -torsional ultrasonic milling of aluminum honeycomb structures},
journal = {Frontiers in Mechanical Engineering},
year = {2026},
volume = {12},
doi = {10.3389/fmech.2026.1833929}
}
EUVIMED