Mechanical properties and failure law of composite rock containing two coplanar fractures
Frontiers in Earth Science · 06.01.2023 · 10
DOI: 10.3389/feart.2022.1007439 ↗Kurz gefasst
Fachartikel in der Zeitschrift Frontiers in Earth Science, online erschienen am 06.01.2023. Verfasst von Hao Yuan und 4 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Yangtze University.
Abstract (Originalsprache)
Composite rocks comprise the rock structures that are commonly used in geotechnical engineering. The fracture configuration has a substantial influence on the mechanical behavior, failure mode, and crack propagation of composite rocks. In this study, we considered a composite rock with two prefabricated coplanar fractures. Through laboratory uniaxial compression tests and using a digital image acquisition system, we systematically studied the effects of different fracture lengths and inclination angles on the mechanical properties and failure characteristics of the rocks. We obtained the following results: 1) during the loading deformation of the rock sample, the peak stress and elastic modulus increased with an increase in the fracture inclination angle and decreased with an increase in the fracture length. The deterioration coefficient k (the ratio of the difference between the peak strength of intact and fractured rock sample to that of intact rock sample) decreased with an increase in the fracture inclination angle and increased with an increase in the fracture length. 2) The failure type of the rock samples was primarily controlled by the fracture inclination angle and material of the two rock types, and the fragmentation degree was primarily controlled by the fracture length. With an increase in the fracture inclination angle, the failure mode of rock sample exhibited the following order of changes leading to failure: a double-Y type (trwo wing and one antiwing cracks appeared on each prefabricated fracture) → double-Z type (two wing cracks appeared on each prefabricated fracture) → Z type (one wing crack appeared on each prefabricated fracture). 3) The type of coalescence of the rock bridge was controlled by the fracture inclination angle and structural plane. The crack positions were primarily affected by the fracture length. 4) At a low fracture inclination angle (α ≤ 30°), the propagation of the microcracks showed aggregated band formation. Above moderate fracture inclination angles (α > 30°), the microcrack aggregation band gradually weakened and expanded in the direction of dispersion.
Förderung
- Yangtze University
Zitieren
APA
Yuan, H., Xiao, T., She, H., Zheng, Y., & Chen, X. (2023). Mechanical properties and failure law of composite rock containing two coplanar fractures. Frontiers in Earth Science, 10. https://doi.org/10.3389/feart.2022.1007439
Vancouver
Yuan H, Xiao T, She H, Zheng Y, Chen X. Mechanical properties and failure law of composite rock containing two coplanar fractures. Frontiers in Earth Science. 2023;10. doi:10.3389/feart.2022.1007439
BibTeX
@article{Yuan2023,
author = {Yuan, Hao and Xiao, Taoli and She, Haicheng and Zheng, Yuanlong and Chen, Xiang},
title = {Mechanical properties and failure law of composite rock containing two coplanar fractures},
journal = {Frontiers in Earth Science},
year = {2023},
volume = {10},
doi = {10.3389/feart.2022.1007439}
}
EUVIMED