EUVIMEDEUVIMED entdecken
ÜbersichtsarbeitOpen Access · CC BY 4.0

Mechanical and biological properties of 3D printed bone tissue engineering scaffolds

Mingxuan Wang, Yunpeng Xu, Luoxi Cao, Le Xiong, Depeng Shang, Yang Cong, Dan Zhao, Xiaowei Wei, Junlei Li, Dapeng Fu, Haoyi Lian, Zhenhua Zhao

Frontiers in Bioengineering and Biotechnology · 04.04.2025 · 13

DOI: 10.3389/fbioe.2025.1545693 ↗

Kurz gefasst

Übersichtsarbeit in der Zeitschrift Frontiers in Bioengineering and Biotechnology, online erschienen am 04.04.2025. Verfasst von Mingxuan Wang und 11 weiteren Autor:innen. Beteiligte Einrichtung: Orthopaedic Department, Affiliated ZhongShan Hospital of Dalian University, Dalian, Liaoning, China. Die Arbeit wurde bisher 36-mal zitiert (Crossref) und nennt 195 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bone defects have historically represented a significant challenge in clinical practice, with traditional surgical intervention remaining the gold standard for their management. However, due to the problem of the origin of autologous and allogeneic bone and the complex and diverse bone defects, traditional surgical methods sometimes cannot meet the treatment needs and expectations of patients. The development of bone tissue engineering and 3D printing technology provides new ideas for bone defect repair. Ideal bioscaffold materials must have good mechanical properties, biocompatibility, osteoinduction and bone conduction capabilities. Additionally, factors such as degradation rate, appropriate porosity and a sustained antibacterial effect must be taken into account. The combination of 3D printing technology and synthetic composite biomaterial scaffolds has become a well-established approach in the treatment of complex bone defects, offering innovative solutions for bone defect repair. The combined application of seed cells, signalling factors and biological scaffolds is also beneficial to improve the therapeutic effect of complex bone defects. This article will therefore examine some of the most commonly used 3D printing technologies for biological scaffolds and the most prevalent bioscaffold materials suitable for 3D printing. An analysis will be conducted on the mechanical and biological properties of these materials to elucidate their respective advantages and limitations.

Schlagwörter

Stichwörter der Autor:innen

3D printingbiocompatibilitybiological scaffoldsbone defectbone tissue engineeringmechanical strengthmechanical strength 3D printingmesenchymal stem cell

Autor:innen und Institutionen

  • Orthopaedic Department, Affiliated ZhongShan Hospital of Dalian University, Dalian, Liaoning, China.
  • Orthopaedic Medical Research Center, Dalian University, Dalian, Liaoning, China.

Zitieren

APA

Wang, M., Xu, Y., Cao, L., Xiong, L., Shang, D., Cong, Y., Zhao, D., Wei, X., Li, J., Fu, D., Lian, H., & Zhao, Z. (2025). Mechanical and biological properties of 3D printed bone tissue engineering scaffolds. Frontiers in Bioengineering and Biotechnology, 13. https://doi.org/10.3389/fbioe.2025.1545693

Vancouver

Wang M, Xu Y, Cao L, Xiong L, Shang D, Cong Y, et al. Mechanical and biological properties of 3D printed bone tissue engineering scaffolds. Frontiers in Bioengineering and Biotechnology. 2025;13. doi:10.3389/fbioe.2025.1545693

BibTeX
@article{Wang2025,
  author = {Wang, Mingxuan and Xu, Yunpeng and Cao, Luoxi and Xiong, Le and Shang, Depeng and Cong, Yang and Zhao, Dan and Wei, Xiaowei and Li, Junlei and Fu, Dapeng and Lian, Haoyi and Zhao, Zhenhua},
  title = {Mechanical and biological properties of 3D printed bone tissue engineering scaffolds},
  journal = {Frontiers in Bioengineering and Biotechnology},
  year = {2025},
  volume = {13},
  doi = {10.3389/fbioe.2025.1545693}
}
Kostenlos starten →