EUVIMEDEUVIMED entdecken
Crossref

Comparative Structural and Mechanical Characterization of FDM 3D ‐Printed PLA Scaffolds for Bone Tissue Engineering Applications

Abdellattief Adel, Mahmoud A. Adly, Reham Reda, Abdallah Abdelkawy

Polymers for Advanced Technologies · 2025-07 · 36 (7)

DOI: 10.1002/pat.70257 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers for Advanced Technologies, online erschienen am 03.07.2025. Verfasst von Abdellattief Adel und 3 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 53 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cellular scaffolds can provide morphological and mechanical integrity with human bone. Various structural designs have been studied; however, their structural and mechanical properties have not been sufficiently compared under the same conditions. This study investigates the effect of unit cell type and size on the dimensional accuracy, porosity accuracy, pore size, and compressive properties of cellular polylactic acid (PLA) scaffolds. These scaffolds were additively manufactured using the fused deposition modeling (FDM) method. Three levels of unit cell type and unit cell sizes were investigated. Strut‐based cubic, octet, and surface‐based gyroid structures with 2.5, 3, and 4 mm unit cell sizes were designed, fabricated, and characterized. The scaffolds were created with a constant porosity of 60%. A two‐way analysis of variance (ANOVA) was performed to identify the significance of unit cell type and size on the measured characteristics. Unit cell type and size significantly impact structural and mechanical properties, as well as the printability of the scaffolds. The structures exhibit trabecular bone‐like mechanical properties, with deformation behavior more dependent on unit cell type than unit cell size. Results show preferability to gyroid structures, with recommendations for enhancing their porosity accuracy.

Zitieren

APA

Adel, A., Adly, M. A., Reda, R., & Abdelkawy, A. (2025). Comparative Structural and Mechanical Characterization of FDM 3D ‐Printed PLA Scaffolds for Bone Tissue Engineering Applications. Polymers for Advanced Technologies, 36(7). https://doi.org/10.1002/pat.70257

Vancouver

Adel A, Adly MA, Reda R, Abdelkawy A. Comparative Structural and Mechanical Characterization of FDM 3D ‐Printed PLA Scaffolds for Bone Tissue Engineering Applications. Polymers for Advanced Technologies. 2025;36(7). doi:10.1002/pat.70257

BibTeX
@article{Adel2025,
  author = {Adel, Abdellattief and Adly, Mahmoud A. and Reda, Reham and Abdelkawy, Abdallah},
  title = {Comparative Structural and Mechanical Characterization of FDM 3D ‐Printed PLA Scaffolds for Bone Tissue Engineering Applications},
  journal = {Polymers for Advanced Technologies},
  year = {2025},
  volume = {36},
  number = {7},
  doi = {10.1002/pat.70257}
}
Kostenlos starten →