EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Reconstruction with 3D-printed prostheses after type I + II + III internal hemipelvectomy: Finite element analysis and preliminary outcomes

Zehao Guo, Yongjun Peng, Qiling Shen, Jian Li, Peng He, Peng Yuan, Yulei Liu, Yukang Que, Wei Guo, Yong Hu, Shenglin Xu

Frontiers in Bioengineering and Biotechnology · 09.01.2023 · 10

DOI: 10.3389/fbioe.2022.1036882 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Frontiers in Bioengineering and Biotechnology, online erschienen am 09.01.2023. Verfasst von Zehao Guo und 10 weiteren Autor:innen. Beteiligte Einrichtung: Department of Orthopedics, The First Affiliated Hospital of Anhui Medical University, Hefei, Anhui, China. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

Prosthetic reconstruction after type I + II+ III internal hemipelvectomy remains challenging due to the lack of osseointegration and presence of giant shear force at the sacroiliac joint. The purpose of this study was to evaluate the biomechanical properties of the novel 3D-printed, custom-made prosthesis with pedicle screw–rod system and sacral tray using finite element analysis.

Methods

Four models that included one intact pelvis were established for validation. Forces of 500 N and 2,000 N were applied, respectively, to simulate static bipedal standing and the most loaded condition during a gait cycle. Biomechanical analysis was performed, and the results were compared; the preliminary outcomes of four patients were recorded.

Results

For the reconstructed hemipelvis, stress was mainly concentrated on the sacral screws, bone–prosthesis interface, and upper endplate of the L5 vertebra. The optimization of the design with the sacral tray structure could decrease the peak stress of the sacral screws by 18.6%, while the maximal stress of the prosthesis increased by 60.7%. The addition of the lumbosacral pedicle–rod system further alleviated stress of the sacral screws and prosthesis by 30.2% and 19.4%, respectively. The site of peak stress was contemporaneously transferred to the connecting rods within an elastic range. In the retrospective clinical study, four patients who had undergone prosthetic reconstruction were included. During a follow-up of 16.6 ± 7.5 months, the walking ability was found preserved in all patients who are still alive and no prosthesis-related complications had occurred except for one hip dislocation. The Musculoskeletal Tumor Society (MSTS) score was found to be 19.5 ± 2.9.

Conclusion

The novel reconstructive system yielded favorable biomechanical characteristics and demonstrated promising preliminary outcomes. The method can be used as a reference for reconstruction after type I + II + III hemipelvectomy.

Schlagwörter

Stichwörter der Autor:innen

3D-printed prosthesisclinical outcomesfinite element analysishemipelvic reconstructionsacroiliac joint

Autor:innen und Institutionen

  • Department of Orthopedics, The First Affiliated Hospital of Anhui Medical University, Hefei, Anhui, China.
  • Musculoskeletal Tumor Center, Peking University People's Hospital, Beijing, China.

Zitieren

APA

Guo, Z., Peng, Y., Shen, Q., Li, J., He, P., Yuan, P., Liu, Y., Que, Y., Guo, W., Hu, Y., & Xu, S. (2023). Reconstruction with 3D-printed prostheses after type I + II + III internal hemipelvectomy: Finite element analysis and preliminary outcomes. Frontiers in Bioengineering and Biotechnology, 10. https://doi.org/10.3389/fbioe.2022.1036882

Vancouver

Guo Z, Peng Y, Shen Q, Li J, He P, Yuan P, et al. Reconstruction with 3D-printed prostheses after type I + II + III internal hemipelvectomy: Finite element analysis and preliminary outcomes. Frontiers in Bioengineering and Biotechnology. 2023;10. doi:10.3389/fbioe.2022.1036882

BibTeX
@article{Guo2023,
  author = {Guo, Zehao and Peng, Yongjun and Shen, Qiling and Li, Jian and He, Peng and Yuan, Peng and Liu, Yulei and Que, Yukang and Guo, Wei and Hu, Yong and Xu, Shenglin},
  title = {Reconstruction with 3D-printed prostheses after type I + II + III internal hemipelvectomy: Finite element analysis and preliminary outcomes},
  journal = {Frontiers in Bioengineering and Biotechnology},
  year = {2023},
  volume = {10},
  doi = {10.3389/fbioe.2022.1036882}
}
Kostenlos starten →