EUVIMEDEUVIMED entdecken
Crossref

The Limits of Data-Sheet Calibration for Micro Turbojet Performance Prediction at Altitude

Maxmillian Mwenda Mugambi, Paul Waweru Njeri, Titus Mulembo, Josphat Tanui

Journal of Applied Science, Engineering and Technology for Development · 16.11.2026 · 6 (1)

DOI: 10.33803/2m3ue6.2 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Science, Engineering and Technology for Development, online erschienen am 16.11.2026. Verfasst von Maxmillian Mwenda Mugambi und 3 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Micro turbojet performance models are commonly calibrated against manufacturer data sheets and subsequently used to predict engine behaviour across flight conditions for which experimental data are unavailable. This study investigates whether such data-sheet calibration uniquely determines the underlying engine model and quantifies the consequences of parameter non-identifiability for off-design performance prediction. The AMT Olympus HP is modelled using a single-spool thermodynamic cycle incorporating temperature-dependent gas properties, scaled component maps, turbine-to-compressor heat transfer, and both choked and unchoked nozzle operation over Mach numbers from 0 to 0.8 and altitudes up to 8000 m. Calibration against the available manufacturer data admits parameter combinations with compressor efficiencies ranging from 0.66 to 0.79. When internal heat-transfer conductance is allowed to scale with air mass flow to the power 0.8, the predictions at 8000 m static have a thrust spread of 4.5% and an installed thrust-specific fuel consumption (TSFC) spread of 9.7%. The altitude trend in the internal parasitic heat fraction is described by a flow-corrected dimensionless group, $\Lambda_{0.8} = \Lambda\left(\frac{\dot{m}_a}{\dot{m}_{a,\mathrm{ref}}}\right)^{0.8}$. In a within-model comparison, this group tracks the representative model's nonlinear heat-fraction trend to within 3.3% over the stated maximum-rpm envelope; this is not independent experimental validation. A hypothetical compressor-exit total-temperature constraint centred on the median of the calibration family reduces the predicted thrust spread at 8000 m static to 1.5%; scanning the possible constraint-window positions gives a range of 0.2% to 1.7%. No independently verified numerical compressor-exit temperature is imposed in this analysis, so this is a sensitivity result rather than an applied experimental constraint.

Zitieren

APA

Mugambi, M. M., Njeri, P. W., Mulembo, T., & Tanui, J. (2026). The Limits of Data-Sheet Calibration for Micro Turbojet Performance Prediction at Altitude. Journal of Applied Science, Engineering and Technology for Development, 6(1). https://doi.org/10.33803/2m3ue6.2

Vancouver

Mugambi MM, Njeri PW, Mulembo T, Tanui J. The Limits of Data-Sheet Calibration for Micro Turbojet Performance Prediction at Altitude. Journal of Applied Science, Engineering and Technology for Development. 2026;6(1). doi:10.33803/2m3ue6.2

BibTeX
@article{Mugambi2026,
  author = {Mugambi, Maxmillian Mwenda and Njeri, Paul Waweru and Mulembo, Titus and Tanui, Josphat},
  title = {The Limits of Data-Sheet Calibration for Micro Turbojet Performance Prediction at Altitude},
  journal = {Journal of Applied Science, Engineering and Technology for Development},
  year = {2026},
  volume = {6},
  number = {1},
  doi = {10.33803/2m3ue6.2}
}
Kostenlos starten →