EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Reconfiguring the CAT250TJ micro turbojet engine for shaft power output

Alexander Christiaan Greyling, Sybrand Johannes van der Spuy, Hano van Eck, Thomas Hildebrandt

Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering · 26.07.2026

DOI: 10.1177/09544100261471801 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, online erschienen am 26.07.2026. Verfasst von Alexander Christiaan Greyling und 3 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Micro turbojet and micro turboprop engines have been investigated as alternative powerplants for UAVs and similar applications. The conversion of the CAT250TJ micro turbojet engine into a power turbine configuration is presented in this study. In the manufactured design, the jet pipe is replaced by an inter-turbine duct and a single-stage power turbine. Simple rectangular exhaust ducts are incorporated downstream of the power turbine. Performance evaluation is conducted by means of 1D Flownex ® models based on CFD-generated compressor and turbine maps. The numerical results are validated by means of cold and hot experimental tests. The experimental results provide good correlation with the Flownex ® models. The Flownex ® simulation results indicate that the manufactured power turbine can produce the design shaft power output of 37.8 kW at 60 000 r/min while powered by the CAT250TJ engine.

Zitieren

APA

Greyling, A. C., Spuy, S. J. V. D., Eck, H. V., & Hildebrandt, T. (2026). Reconfiguring the CAT250TJ micro turbojet engine for shaft power output. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. https://doi.org/10.1177/09544100261471801

Vancouver

Greyling AC, Spuy SJVD, Eck HV, Hildebrandt T. Reconfiguring the CAT250TJ micro turbojet engine for shaft power output. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering. 2026. doi:10.1177/09544100261471801

BibTeX
@article{Greyling2026,
  author = {Greyling, Alexander Christiaan and Spuy, Sybrand Johannes van der and Eck, Hano van and Hildebrandt, Thomas},
  title = {Reconfiguring the CAT250TJ micro turbojet engine for shaft power output},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering},
  year = {2026},
  doi = {10.1177/09544100261471801}
}
Kostenlos starten →