EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Analisis Aliran Cetakan Paving Block Menggunakan Material Polypropylene (PP)

Yoga Aryatama, Muhammad Yunus, Subkhan Subkhan

Jurnal Inovasi Teknologi Terapan · 18.08.2026 · 4 (2) · 494-499

DOI: 10.33504/jitt.v4i2.392 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Inovasi Teknologi Terapan, online erschienen am 18.08.2026. Verfasst von Yoga Aryatama und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents the design and flow analysis of a polypropylene (PP) injection mold for paving block production as a cost-efficient and lightweight alternative to conventional metal molds. The research consists of a field survey at Tacon company, product geometry evaluation, mold design using SolidWorks, and flow simulation to assess mold performance. Simulation results indicate that the two-plate mold with a 2 mm wall thickness can withstand loads up to two stacked paving blocks (40 N) without deformation. The filling time was recorded at 1.6491 seconds, with a maximum injection pressure of 49.03 MPa, and cooling time ranging between 5.14–10.64 seconds. The sink mark value was very small (0.0031 mm) and located in non-critical areas, while air traps appeared only at the cavity edges. These findings confirm that PP can be effectively used as a mold material for paving blocks, providing stable melt flow behavior, good product quality, and efficient cooling cycles. This research contributes to the development of polymer-based mold technology for affordable, lightweight, and locally manufacturable paving block production.

Zitieren

APA

Aryatama, Y., Yunus, M., & Subkhan, S. (2026). Analisis Aliran Cetakan Paving Block Menggunakan Material Polypropylene (PP). Jurnal Inovasi Teknologi Terapan, 4(2), 494-499. https://doi.org/10.33504/jitt.v4i2.392

Vancouver

Aryatama Y, Yunus M, Subkhan S. Analisis Aliran Cetakan Paving Block Menggunakan Material Polypropylene (PP). Jurnal Inovasi Teknologi Terapan. 2026;4(2):494-499. doi:10.33504/jitt.v4i2.392

BibTeX
@article{Aryatama2026,
  author = {Aryatama, Yoga and Yunus, Muhammad and Subkhan, Subkhan},
  title = {Analisis Aliran Cetakan Paving Block Menggunakan Material Polypropylene (PP)},
  journal = {Jurnal Inovasi Teknologi Terapan},
  year = {2026},
  volume = {4},
  number = {2},
  pages = {494--499},
  doi = {10.33504/jitt.v4i2.392}
}
Kostenlos starten →