EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Analisis Pengaruh Parameter Pemesinan CNC Milling terhadap Material Removal Rate pada Dudukan Cetakan Kampas Rem

Hadi Usman, Eko Yudo, Sukanto Sukanto

Jurnal Inovasi Teknologi Terapan · 18.08.2026 · 4 (2) · 444-452

DOI: 10.33504/jitt.v4i2.402 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Inovasi Teknologi Terapan, online erschienen am 18.08.2026. Verfasst von Hadi Usman und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the influence of CNC Milling parameter variations on the Material Removal Rate (MRR) of S45C steel brake lining mold holders using the Taguchi method. Three parameters—spindle speed, feed rate, and depth of cut—were tested at three levels through an L9 experimental design. Data were analyzed using the signal-to-noise ratio, ANOVA, and normality testing. Results indicate that none of the parameters significantly affect MRR at the 5% level (Fcount < Ftable = 19.00). Depth of cut showed the highest relative contribution (7.39%), while spindle speed and feed rate contributed negatively. A high error value (92.99%) suggests unobserved external factors. The optimal combination is 2388 rpm, 191 mm/min, and 2.67 mm, yielding a predicted MRR of 90.0766 (CI ±0.4126). Normality assumptions were met (p > 0.150).

Zitieren

APA

Usman, H., Yudo, E., & Sukanto, S. (2026). Analisis Pengaruh Parameter Pemesinan CNC Milling terhadap Material Removal Rate pada Dudukan Cetakan Kampas Rem. Jurnal Inovasi Teknologi Terapan, 4(2), 444-452. https://doi.org/10.33504/jitt.v4i2.402

Vancouver

Usman H, Yudo E, Sukanto S. Analisis Pengaruh Parameter Pemesinan CNC Milling terhadap Material Removal Rate pada Dudukan Cetakan Kampas Rem. Jurnal Inovasi Teknologi Terapan. 2026;4(2):444-452. doi:10.33504/jitt.v4i2.402

BibTeX
@article{Usman2026,
  author = {Usman, Hadi and Yudo, Eko and Sukanto, Sukanto},
  title = {Analisis Pengaruh Parameter Pemesinan CNC Milling terhadap Material Removal Rate pada Dudukan Cetakan Kampas Rem},
  journal = {Jurnal Inovasi Teknologi Terapan},
  year = {2026},
  volume = {4},
  number = {2},
  pages = {444--452},
  doi = {10.33504/jitt.v4i2.402}
}
Kostenlos starten →