EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Kelayakan Komposit Rpet -Karbon Aktif Sebagai Filamen 3D Studi Eksperimental Terhadap Sifat Mekanik

Meriatun Meriatun, Sugianto Sugianto, Hasdiansah Hasdiansah

Jurnal Inovasi Teknologi Terapan · 18.08.2026 · 4 (2) · 391-401

DOI: 10.33504/jitt.v4i2.369 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Inovasi Teknologi Terapan, online erschienen am 18.08.2026. Verfasst von Meriatun Meriatun und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The accumulation of plastic waste, particularly polyethylene terephalate (PET), has become a serious environmental issue due to its widespread use and long degradation period. Although recycling PET waste offers environmental and economic benefits, its limited mechanical properties restrict its potential application in advanced manufacturing such as 3D printing. Previous studies have shown that reinforcement with carbon-based fillers can improve the performance of recycled PET;however, research on the mechanical characterization of recycled PET composites reinforced with activated carbon remains limited. This study aims to examine the feasibility of polymer composites made from recycled PET reinforced with activated carbon as a raw material for 3D filament production. Recycled PET was mixed with various amounts of activated carbon and mechanically tested according to ASTM D638 (tensile test) and ASTM D256 (impact test). The results showed that the addition of activated carbon affected the tensile strength, elastic modulus, and impact toughness. The optimum composition was obtained at 2.25 g of activated carbon, which provided the best impact resistance. However, the low elongation indicated brittle behavior, suggesting that further modification is required. This study provides an alternative approach for utilizing recycled PET plastic waste as a sustainable and functional material for 3D printing filament

Zitieren

APA

Meriatun, M., Sugianto, S., & Hasdiansah, H. (2026). Kelayakan Komposit Rpet -Karbon Aktif Sebagai Filamen 3D Studi Eksperimental Terhadap Sifat Mekanik. Jurnal Inovasi Teknologi Terapan, 4(2), 391-401. https://doi.org/10.33504/jitt.v4i2.369

Vancouver

Meriatun M, Sugianto S, Hasdiansah H. Kelayakan Komposit Rpet -Karbon Aktif Sebagai Filamen 3D Studi Eksperimental Terhadap Sifat Mekanik. Jurnal Inovasi Teknologi Terapan. 2026;4(2):391-401. doi:10.33504/jitt.v4i2.369

BibTeX
@article{Meriatun2026,
  author = {Meriatun, Meriatun and Sugianto, Sugianto and Hasdiansah, Hasdiansah},
  title = {Kelayakan Komposit Rpet -Karbon Aktif Sebagai Filamen 3D Studi Eksperimental Terhadap Sifat Mekanik},
  journal = {Jurnal Inovasi Teknologi Terapan},
  year = {2026},
  volume = {4},
  number = {2},
  pages = {391--401},
  doi = {10.33504/jitt.v4i2.369}
}
Kostenlos starten →