Fluid–thermal Control of PMMA Cementation for Long Femoral Stems
Recent Advances in Clinical Trials · 28.02.2026 · 6 (1)
DOI: 10.33425/2771-9057.1076 ↗Kurz gefasst
Fachartikel in der Zeitschrift Recent Advances in Clinical Trials, online erschienen am 28.02.2026. Verfasst von Chi-Ming Chiang.
Abstract (Originalsprache)
Background
PMMA cementation couples time-dependent, non-Newtonian flow with exothermic polymerization. Long femoral stems challenge mantle control because viscosity rise, canal pressurization, and insertion kinematics must be coordinated over a larger cement volume while maintaining a conservative thermal window.
Methods
We implemented a fluid–thermal control law (μ–Δp–U–δ) emphasizing early low-viscosity continuous pressurization with proximal sealing, an isovelocity stem-insertion trajectory, and δ-guided mantle balancing using surgeon-observable resistance/back-pressure cues. Postoperative radiographs were graded for cement quality (Barrack; Gruen zones) and calibrated mantle thickness, with an a priori target of 2–4 mm.
Results
The cement mantle was continuous (Barrack A–B on AP and B on lateral) with no radiolucent lines >1 mm. Calibrated mantle thickness was predominantly within the 2–4 mm target band, with a focal maximum of 7.5 mm; no periprosthetic fracture occurred.
Conclusion
Framing cementation as a coupled fluid–thermal control problem provided a practical pathway to achieve a high-quality mantle in a long-stem construct. Thermal risk was constrained by design (pre-cooling, sustained pressure plateau, and avoidance of thick cement pockets) relative to a conservative ≈47 °C × 60 s criterion, motivating prospective validation with intraoperative pressure/temperature logging. Translational potential of this article: A low-dimensional control law—operationally visible to surgeons as timing (μ), steadiness (Δp), and kinematics (U), with δ as a proxy for thickness uniformity—can steer cementation toward a reproducible 2–4 mm mantle even for long stems. The framework is directly testable with intraoperative pressure/ temperature logging and bench thermal characterization.
Zitieren
APA
Chiang, C. (2026). Fluid–thermal Control of PMMA Cementation for Long Femoral Stems. Recent Advances in Clinical Trials, 6(1). https://doi.org/10.33425/2771-9057.1076
Vancouver
Chiang C. Fluid–thermal Control of PMMA Cementation for Long Femoral Stems. Recent Advances in Clinical Trials. 2026;6(1). doi:10.33425/2771-9057.1076
BibTeX
@article{Chiang2026,
author = {Chiang, Chi-Ming},
title = {Fluid–thermal Control of PMMA Cementation for Long Femoral Stems},
journal = {Recent Advances in Clinical Trials},
year = {2026},
volume = {6},
number = {1},
doi = {10.33425/2771-9057.1076}
}
EUVIMED