EUVIMEDOpdag EUVIMED
Crossref

On the Effect of Nickel Alloying for Improving the Brittle Fracture Resistance of Structural Plate Steels

Hardy Mohrbacher, Andreas Kern

Iron & Steel Technology · 2025

DOI: 10.33313/tr/0425 ↗

At a glance

Journal article in Iron & Steel Technology, 2025. Written by Hardy Mohrbacher and 1 co-authors.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Nickel is an important and widely used alloying element in carbon steels which can significantly improve toughness, especially at low temperatures. This effect is explicitly used in alloys for cryogenic steels where nickel contents of up to 9 mass percent are used. In structural plate steels with minimum yield strength of 355 - 460 MPa the nickel alloy content is limited per specification to 0.7 (DIN EN 10225) or 1.0 (Norsok) mass percent. Nevertheless, even comparably low nickel additions can be beneficial to toughness performance of structural plate steels. Particularly in heavy gage plates where rolling deformation in the center area and hence microstructural refinement is limited, nickel alloying may be the only metallurgical means to achieve toughness improvement. The evaluation of brittle fracture resistance of structural plate steels for either onshore or offshore constructions predominantly relies on the fracture-mechanical CTOD (Crack-Tip-Opening-Displacement) concept. This criterion characterizes the local deformation capacity of the steel close to the crack tip and is valid for the considered structural plate steels, due to their elastic-plastic material behavior. This contribution briefly summarizes the physical-metallurgical mechanism as to why nickel alloying improves low-temperature toughness. Regarding the magnitude of the effect in structural steels an ad-hoc evaluation of industrially produced plates of grade S355N with nickel alloying of up to 0.6 mass percent was performed. CTOD values were measured as function of test temperature allowing to identify the transition behavior. The effect of nickel on the transition temperature was clearly reflected by improvements of up to 80 K. In selected cases this analysis was also performed in the heat affected zone after welding of such steels likewise indicating the beneficial effect of nickel. The

Cite

APA

Mohrbacher, H., & Kern, A. (2025). On the Effect of Nickel Alloying for Improving the Brittle Fracture Resistance of Structural Plate Steels. Iron & Steel Technology. https://doi.org/10.33313/tr/0425

Vancouver

Mohrbacher H, Kern A. On the Effect of Nickel Alloying for Improving the Brittle Fracture Resistance of Structural Plate Steels. Iron & Steel Technology. 2025. doi:10.33313/tr/0425

BibTeX
@article{Mohrbacher2025,
  author = {Mohrbacher, Hardy and Kern, Andreas},
  title = {On the Effect of Nickel Alloying for Improving the Brittle Fracture Resistance of Structural Plate Steels},
  journal = {Iron & Steel Technology},
  year = {2025},
  doi = {10.33313/tr/0425}
}
Start for free →