EUVIMEDEUVIMED entdecken
Crossref

Insert Molding for Manufacturing Metal/Amorphous Polymer Jointed Parts Using Heat & Cool Injection Molding

Goro Inoue, Kazuki Kimura, Masaki Misumi

Journal of Electrical Electronics Engineering · 09.03.2026 · 05 (02) · 01-06

DOI: 10.33140/jeee.05.02.05 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Electrical Electronics Engineering, online erschienen am 09.03.2026. Verfasst von Goro Inoue und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The insert injection molding for manufacturing AL/amorphous polymer jointed parts using H&C injection molding was studied. Different from crystalline polymers such as PP, PPS, PA6, amorphous polymers couldn’t reach high bonding strength at the constant mold temperature condition. By using H&C injection molding method, it was confirmed that even with amorphous polymers, the lap-shear strength increased and the polymer entered sufficiently the micropores on the surface treated AL, as well as crystalline polymers.

Zitieren

APA

Inoue, G., Kimura, K., & Misumi, M. (2026). Insert Molding for Manufacturing Metal/Amorphous Polymer Jointed Parts Using Heat & Cool Injection Molding. Journal of Electrical Electronics Engineering, 05(02), 01-06. https://doi.org/10.33140/jeee.05.02.05

Vancouver

Inoue G, Kimura K, Misumi M. Insert Molding for Manufacturing Metal/Amorphous Polymer Jointed Parts Using Heat & Cool Injection Molding. Journal of Electrical Electronics Engineering. 2026;05(02):01-06. doi:10.33140/jeee.05.02.05

BibTeX
@article{Inoue2026,
  author = {Inoue, Goro and Kimura, Kazuki and Misumi, Masaki},
  title = {Insert Molding for Manufacturing Metal/Amorphous Polymer Jointed Parts Using Heat & Cool Injection Molding},
  journal = {Journal of Electrical Electronics Engineering},
  year = {2026},
  volume = {05},
  number = {02},
  pages = {01--06},
  doi = {10.33140/jeee.05.02.05}
}
Kostenlos starten →