EUVIMEDEUVIMED entdecken
Crossref

Polymer-based Bipolar Plates for Fuel Cells

Szabolcs Hajagos, József Gábor Kovács

Periodica Polytechnica Mechanical Engineering · 16.12.2024 · 69 (1) · 40-45

DOI: 10.3311/ppme.38589 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Periodica Polytechnica Mechanical Engineering, online erschienen am 16.12.2024. Verfasst von Szabolcs Hajagos und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents the optimization of bipolar plates for polymer-based fuel cells designed for small-scale applications like drones and portable devices. The fuel cell uses an open-cathode system, where air from the environment is the oxidant, reducing weight and complexity. Three initial design concepts were created, and the counter-flow design was selected for further development due to its higher performance potential. The plate geometry was optimized with semi-circular channels on the anode side to improve hydrogen flow and U-shaped channels on the cathode side for better water removal. Flow and pressure distributions were analyzed using Computational Fluid Dynamics (CFD). Although early results showed uneven distribution, further adjustments led to a new design, which improved manufacturability and reduced deformation. After testing different gas inlet configurations, a final design was developed, showing more uniform flow and better performance for lightweight applications.

Zitieren

APA

Hajagos, S., & Kovács, J. G. (2024). Polymer-based Bipolar Plates for Fuel Cells. Periodica Polytechnica Mechanical Engineering, 69(1), 40-45. https://doi.org/10.3311/ppme.38589

Vancouver

Hajagos S, Kovács JG. Polymer-based Bipolar Plates for Fuel Cells. Periodica Polytechnica Mechanical Engineering. 2024;69(1):40-45. doi:10.3311/ppme.38589

BibTeX
@article{Hajagos2024,
  author = {Hajagos, Szabolcs and Kovács, József Gábor},
  title = {Polymer-based Bipolar Plates for Fuel Cells},
  journal = {Periodica Polytechnica Mechanical Engineering},
  year = {2024},
  volume = {69},
  number = {1},
  pages = {40--45},
  doi = {10.3311/ppme.38589}
}
Kostenlos starten →