Formability of thin stainless steel bipolar plates for hydrogen fuel cells considering grained anisotropy
The International Journal of Advanced Manufacturing Technology · 2026-08 · 145 (7-8) · 5589-5607
DOI: 10.1007/s00170-026-18557-w ↗Kurz gefasst
Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 09.07.2026. Verfasst von Feijun Qu und 9 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The University of Wollongong.
Abstract (Originalsprache)
This study presents a combined numerical and experimental investigation into the formability of thin super ferritic and austenitic stainless steel bipolar plates for hydrogen fuel cell. A finite element framework incorporating grained anisotropy is developed using a Voronoi tessellation-based approach in Abaqus/Explicit, where individual grains are randomly assigned true stress-strain curves derived from tensile tests to replicate the heterogeneous deformation behaviour of polycrystalline materials. Micro stamping simulations capture the evolution of equivalent stress, plastic strain, and thickness distribution across the formed micro-channel geometries. Corresponding stamping experiments are conducted on approximately 0.1 mm thick stainless steel sheets. The measured local thinning, channel depth, and overall geometry are used to validate the numerical predictions. Comparative analysis reveals that the super ferritic stainless steel exhibits lower ductility and greater sensitivity to geometric constraints. In contrast, the austenitic grade shows higher formability and more uniform material flow, resulting in reduced localised thinning and improved shape accuracy. The Voronoi-based model accurately predicts critical deformation characteristics for both alloys, supporting process design and optimisation to enhance the quality and reliability of bipolar plates. This work advances the understanding of microforming behaviour and provides practical insights for manufacturing hydrogen fuel cell components.
Förderung
- The University of Wollongong
Zitieren
APA
Qu, F., Abid, M., Zhao, D., Zou, J., Han, J., Bi, H., Zhang, Z., Yu, H., Jia, F., & Jiang, Z. (2026). Formability of thin stainless steel bipolar plates for hydrogen fuel cells considering grained anisotropy. The International Journal of Advanced Manufacturing Technology, 145(7-8), 5589-5607. https://doi.org/10.1007/s00170-026-18557-w
Vancouver
Qu F, Abid M, Zhao D, Zou J, Han J, Bi H, et al. Formability of thin stainless steel bipolar plates for hydrogen fuel cells considering grained anisotropy. The International Journal of Advanced Manufacturing Technology. 2026;145(7-8):5589-5607. doi:10.1007/s00170-026-18557-w
BibTeX
@article{Qu2026,
author = {Qu, Feijun and Abid, Muhammad and Zhao, Daiyan and Zou, Jin and Han, Jian and Bi, Hongyun and Zhang, Zhixia and Yu, Haifeng and Jia, Fanghui and Jiang, Zhengyi},
title = {Formability of thin stainless steel bipolar plates for hydrogen fuel cells considering grained anisotropy},
journal = {The International Journal of Advanced Manufacturing Technology},
year = {2026},
volume = {145},
number = {7-8},
pages = {5589--5607},
doi = {10.1007/s00170-026-18557-w}
}
EUVIMED