EUVIMEDEUVIMED entdecken
Crossref

Adhesive Cementation of CAD/CAM Silica-based Ceramics: Effect of Adhesive Type and hong-term Aging on the Bond Strength to Composite Cement

Nathália Ramos da Silva, Evelynn Crhistyann Medeiros Duarte, Dayanne Monielle Duarte Moura, Nathália Fonseca [UNESP] Ramos, Karina Barbosa Souza, Fábio Roberto Dametto, Mutlu Ozcan, Marco Antônıo Bottıno, Rodrigo Othávio Assunção Souza

LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas) · 01.01.2024

DOI: 10.3290/j.jad.65341383 ↗

Kurz gefasst

Fachartikel in der Zeitschrift LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas), erschienen am 01.01.2024. Verfasst von Nathália Ramos da Silva und 8 weiteren Autor:innen.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Purpose

To investigate the effect of adhesive type and long-term aging on the shear bond strength (SBS) between silica-based ceramics and composite cement (CC). Materials and methods: Lithium-silicate (LS), feldspathic (FD) and polymer-infiltrated ceramic (PIC) blocks were sectioned (10 x 12 x 2 mm) and divided into 24 groups considering the factors: ceramics (LS, FD, and PIC), adhesive (Ctrl: without adhesive; 2SC: 2-step conventional; 3SC: 3-step conventional; 1SU: 1-step universal), and aging (non-aged or aged [A]). After the surface treatments, CC cylinders (n = 15, & Oslash; = 2 mm; height = 2 mm) were made and half of the samples were subjected to thermocycling (10,000) and stored in water at 37 degrees C for 18 months. The samples were submitted to SBS testing (100 kgf, 1 mm/min) and failure analysis. Extra samples were prepared for microscopic analysis of the adhesive interface. SBS (MPa) data was analyzed by 3-way ANOVA and Tukey's test (5%). Weibull analysis was performed on the SBS data.

Results

All factors and interactions were significant for SBS (p

Schlagwörter

adhesive cementationCAD/CAM ceramicssilica-based ceramicsfeldspathic porcelainpolymer-infiltrated ceramicblended cementshear bond strengthadhesive typeuniversal adhesivesilane

Zitieren

APA

Silva, N. R. D., Duarte, E. C. M., Moura, D. M. D., Ramos, N. F. U., Souza, K. B., Dametto, F. R., Ozcan, M., Bottıno, M. A., & Souza, R. O. A. (2024). Adhesive Cementation of CAD/CAM Silica-based Ceramics: Effect of Adhesive Type and hong-term Aging on the Bond Strength to Composite Cement. LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). https://doi.org/10.3290/j.jad.65341383

Vancouver

Silva NRD, Duarte ECM, Moura DMD, Ramos NFU, Souza KB, Dametto FR, et al. Adhesive Cementation of CAD/CAM Silica-based Ceramics: Effect of Adhesive Type and hong-term Aging on the Bond Strength to Composite Cement. LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas). 2024. doi:10.3290/j.jad.65341383

BibTeX
@article{Silva2024,
  author = {Silva, Nathália Ramos da and Duarte, Evelynn Crhistyann Medeiros and Moura, Dayanne Monielle Duarte and Ramos, Nathália Fonseca [UNESP] and Souza, Karina Barbosa and Dametto, Fábio Roberto and Ozcan, Mutlu and Bottıno, Marco Antônıo and Souza, Rodrigo Othávio Assunção},
  title = {Adhesive Cementation of CAD/CAM Silica-based Ceramics: Effect of Adhesive Type and hong-term Aging on the Bond Strength to Composite Cement},
  journal = {LA Referencia (Red Federada de Repositorios Institucionales de Publicaciones Científicas)},
  year = {2024},
  doi = {10.3290/j.jad.65341383}
}
Kostenlos starten →