EUVIMEDEUVIMED entdecken
Crossref

Three-Dimensional Finite Element Biomechanical Study of Surgical Dislocation with Impacted Bone Grafting for Osteonecrosis of the Femoral Head

Zeng Li, Yuan Chen

International Journal of Healthcare and Medical Sciences · 2026

DOI: 10.32861/ijhms.122.29.38 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Healthcare and Medical Sciences, 2026. Verfasst von Zeng Li und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Objective

To evaluate the biomechanical effects of surgical dislocation combined with impacted bone grafting for osteonecrosis of the femoral head (ONFH) under varying hip flexion angles using three-dimensional finite element analysis, and to elucidate the mechanical rationale for restricting excessive hip flexion during postoperative rehabilitation.

Methods

A 42-year-old male patient with unilateral ARCO stage II ONFH was enrolled. Based on CT imaging data, three three-dimensional finite element models were established: a normal hip (normal group), a necrotic hip (necrotic group), and a postoperative hip following surgical dislocation with impacted bone grafting (surgical group). Four loading conditions corresponding to hip flexion angles of 0°, 30°, 60°, and 90° were simulated, applying abductor muscle force of 300 N, iliopsoas muscle force of 188 N, vastus lateralis muscle force of 292 N, and hip joint reaction force of 700 N. The maximum Von Mises stress, maximum displacement, and stress distribution patterns of the femoral head and necrotic region were compared among the groups.

Results

(1) For maximum femoral head stress, at 0° flexion, it was 5.36 MPa for the normal group, 11.75 MPa for the necrotic group, and 13.22 MPa for the surgical group; at 90° flexion, it was 8.74 MPa, 14.94 MPa, and 21.58 MPa, respectively. (2) Regarding maximum stress in the necrotic region, at 0° flexion, it was 0.512 MPa for the necrotic group and 0.448 MPa for the surgical group; at 90° flexion, it was 0.885 MPa and 0.874 MPa, respectively. (3) For maximum femoral head displacement, at 0° flexion, it was 0.453 mm (normal), 0.479 mm (necrotic), and 0.463 mm (surgical); at 90° flexion, it was 1.235 mm, 1.309 mm, and 1.245 mm, respectively. (4) In the surgical group, grafted bone displacement increased from 0.410 mm at 0° to 1.081 mm at 90°, and grafted bone stress increased from 14.50 MPa at 0° to 18.44 MPa at 90°.

Conclusion

Surgical dislocation with impacted bone grafting can partially restore the mechanical environment of the necrotic femoral head. However, stress values in the surgical group remained higher than those in the normal group across all flexion angles, indicating that postoperative restricted weight-bearing is still necessary. Hip flexion angle significantly influences femoral head loading, and excessive hip flexion should be avoided in the early postoperative period to mitigate the risk of graft micromotion and subsequent femoral head collapse.

Zitieren

APA

Li, Z., & Chen, Y. (2026). Three-Dimensional Finite Element Biomechanical Study of Surgical Dislocation with Impacted Bone Grafting for Osteonecrosis of the Femoral Head. International Journal of Healthcare and Medical Sciences. https://doi.org/10.32861/ijhms.122.29.38

Vancouver

Li Z, Chen Y. Three-Dimensional Finite Element Biomechanical Study of Surgical Dislocation with Impacted Bone Grafting for Osteonecrosis of the Femoral Head. International Journal of Healthcare and Medical Sciences. 2026. doi:10.32861/ijhms.122.29.38

BibTeX
@article{Li2026,
  author = {Li, Zeng and Chen, Yuan},
  title = {Three-Dimensional Finite Element Biomechanical Study of Surgical Dislocation with Impacted Bone Grafting for Osteonecrosis of the Femoral Head},
  journal = {International Journal of Healthcare and Medical Sciences},
  year = {2026},
  doi = {10.32861/ijhms.122.29.38}
}
Kostenlos starten →