Evaluation of Fracture Durability and Wear Resistance Properties for Orthopaedic Implant Application
ASM Science Journal · 10.10.2024 · 19 · 1-9
DOI: 10.32802/asmscj.2023.1378 ↗Kurz gefasst
Fachartikel in der Zeitschrift ASM Science Journal, online erschienen am 10.10.2024. Verfasst von Sachin Solanke und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Hydroxyapatite (HA) coated metallic substrates are commonly used for load-bearing orthopedic implants. In the present work Titanium grade 2 and Titanium grade 5 substrates were coated with hydroxyapatite and hydroxyapatite reinforced with 5% (by wt.) multiwalled carbon nanotubes (MCNT) separately using plasma spray coating. The wear behavior of these coated substrates was studied with the simulated body fluid (SBF) having a pH between 7.20 to 7.40. Fracture toughness and wear resistance of HA reinforced with 5 % (by wt.) MCNT composite coating was found to be higher as compared to pure HA coating. This improvement is by virtue of inherent mechanical properties and the crack bridging effect offered by MCNT. The addition of MCNT also helped in restricting crack propagation in the coatings. As evident from SEM images, abrasive and adhesive wear mechanism were observed which reduces greatly with reinforcement of MCNT.
Zitieren
APA
Solanke, S., Gaval, V. R., Hussain, M. M., & Pratap, A. P. (2024). Evaluation of Fracture Durability and Wear Resistance Properties for Orthopaedic Implant Application. ASM Science Journal, 19, 1-9. https://doi.org/10.32802/asmscj.2023.1378
Vancouver
Solanke S, Gaval VR, Hussain MM, Pratap AP. Evaluation of Fracture Durability and Wear Resistance Properties for Orthopaedic Implant Application. ASM Science Journal. 2024;19:1-9. doi:10.32802/asmscj.2023.1378
BibTeX
@article{Solanke2024,
author = {Solanke, Sachin and Gaval, Vivek Ramdas and Hussain, Md Modassir and Pratap, Amit P},
title = {Evaluation of Fracture Durability and Wear Resistance Properties for Orthopaedic Implant Application},
journal = {ASM Science Journal},
year = {2024},
volume = {19},
pages = {1--9},
doi = {10.32802/asmscj.2023.1378}
}
EUVIMED