Impact of the Hydroxyapatite Concentration on the Mechanical properties and accelerated degradation of PCL-based Scaffolds in the Bone Tissues Engineering .
University of Thi-Qar Journal · 30.03.2026 · 21 (1) · 177-187
DOI: 10.32792/utj.v21i1.460 ↗Kurz gefasst
Fachartikel in der Zeitschrift University of Thi-Qar Journal, online erschienen am 30.03.2026. Verfasst von Hussein Mishbak.
Abstract (Originalsprache)
Polycaprolactone (PCL) has become one of the most prominent biomaterials for bonetissue engineering scaffolds due to its biocompatibility, FDA approval and durability ofmechanical properties. However, pure PCL scaffolds have some inherent limitationssuch as high hydrophobicity and inadequate bioactivity. This study overcomes theselimitations by incorporating hydroxyapatite (HA) nanoparticles in PCL based compositescaffolds at different concentrations (10% and 20% w/w). PCL/HA composite scaffoldsand pure PCL controls were produced by the solvent casting and salt leaching methodand fully characterized. The addition of HA improved both tensile and compressivemechanical properties of the composites in a concentration dependent manner. PCL/HA(20% w/w) scaffolds showed tensile strength of 16.5 MPa and compressive strength of18.4 MPa which were 52.8% and 60.0% respectively higher than pure PCL. Allscaffolds had well-interconnected porous architectures that are suitable for theinfiltration of cells and the transport of nutrients. Accelerated degradation studies with5.0 M NaOH solution showed that the effect of HA incorporation significantlyaccelerated degradation of the scaffold in a concentration-dependent manner withPCL/HA (20% w/w) showing 25% mass loss over five days compared to less than 4%for pure PCL. This accelerated degradation is attributed to the hydrophilic nature of HAparticles to act as absorbances and to infiltrate the corrosive medium into the scaffoldsubstance coupled with increased internal surface area due to HA-induced microporeson strut walls. These findings indicate that PCL/HA composite scaffolds provide anacceptable compromise between improved mechanical properties and tunabledegradation behavior, and could be good candidates for load-bearing bone tissueengineering applications in which mechanical support and controlled tissue integrationare important.
Zitieren
APA
Mishbak, H. (2026). Impact of the Hydroxyapatite Concentration on the Mechanical properties and accelerated degradation of PCL-based Scaffolds in the Bone Tissues Engineering. University of Thi-Qar Journal, 21(1), 177-187. https://doi.org/10.32792/utj.v21i1.460
Vancouver
Mishbak H. Impact of the Hydroxyapatite Concentration on the Mechanical properties and accelerated degradation of PCL-based Scaffolds in the Bone Tissues Engineering. University of Thi-Qar Journal. 2026;21(1):177-187. doi:10.32792/utj.v21i1.460
BibTeX
@article{Mishbak2026,
author = {Mishbak, Hussein},
title = {Impact of the Hydroxyapatite Concentration on the Mechanical properties and accelerated degradation of PCL-based Scaffolds in the Bone Tissues Engineering},
journal = {University of Thi-Qar Journal},
year = {2026},
volume = {21},
number = {1},
pages = {177--187},
doi = {10.32792/utj.v21i1.460}
}
EUVIMED