EUVIMEDObjevte EUVIMED
Crossref

Design and simulation of scaffolds with lattice microstructures for bioprinting bone tissue

Esmeralda Zuñiga-Aguilar, Odin Ramírez-Fernández, Adeodato Botello-Arredondo

Bio-Medical Materials and Engineering · 2024

DOI: 10.3233/bme-230049 ↗

At a glance

Journal article in Bio-Medical Materials and Engineering, 2024. Written by Esmeralda Zuñiga-Aguilar and 2 co-authors. Institution: Department of Electrical and Computational Engineer, Instituto de Ingeniería y Tecnología, Universidad Autónoma de Ciudad Juárez, Ciudad Juárez, Mexi…. Major MEDLINE topics: Tissue Scaffolds, Tissue Engineering, Finite Element Analysis, Computer-Aided Design. Cited 3 times so far (Crossref); 27 references.

AbstraktSubjectsBibliografické údajeCiteRelated studies

Abstract (original language)

BACKGROUND: Tissue engineering seeks to improve, maintain, or replace the biological functions of damaged organs or tissues with biological substitutes such as the development of scaffolds. In the case of bone tissue, they must have excellent mechanical properties like native bone. OBJECTIVE: In this work, three geometric models were designed for scaffolds with different structure lattices and porosity that could be biomechanically suitable and support cell growth for trabecular bone replacement applications in tissue engineering and regenerative medicine to the proximal femur area. METHODS: Geometries were designed using computer-aided design (CAD) software and evaluated using finite element analysis in compression tests. Three loads were considered according to the daily activity: 1177 N for slow walking, 2060 N for fast walking, and 245.25 N for a person in a bipedal position. All these loads for an adult weight of 75 kg. For each of them, three biomaterials were assigned: two polymers (poly-glycolic acid (PGA) and poly-lactic acid (PLA)) and one mineral (hydroxyapatite (HA)). 54 tests were performed: 27 for each of the tests. RESULTS: The results showed Young’s modulus (E) between 1 and 4 GPa. CONCLUSION: If the resultant E is in the range of 0.1 to 5 GPa, the biomaterial is considered an appropriate alternative for the trabecular bone which is the main component of the proximal bone. However, for the models applied in this study, the best option is the poly-lactic acid which will allow absorbing the acting loads.

Subjects

MeSH terms (MEDLINE)

Tissue ScaffoldsTissue EngineeringFinite Element AnalysisComputer-Aided DesignHumansDurapatiteElastic ModulusBioprintingPolyestersPorosityComputer SimulationBiocompatible MaterialsBone SubstitutesPolyglycolic AcidPrinting, Three-DimensionalMaterials TestingBone and Bones

Author keywords

Scaffoldbiomechanicalfemurlatticetissue engineering

Substances

Durapatitepoly(lactide)PolyestersBiocompatible MaterialsBone SubstitutesPolyglycolic Acid

Authors and institutions

  • Department of Electrical and Computational Engineer, Instituto de Ingeniería y Tecnología, Universidad Autónoma de Ciudad Juárez, Ciudad Juárez, Mexico.
  • Universidad Tecnologica de Mexico (UNITEC), Ciudad de México, Mexico.
  • Tecnológico de Monterrey, Monterrey, Mexico.

Cite

APA

Zuñiga-Aguilar, E., Ramírez-Fernández, O., & Botello-Arredondo, A. (2024). Design and simulation of scaffolds with lattice microstructures for bioprinting bone tissue. Bio-Medical Materials and Engineering. https://doi.org/10.3233/bme-230049

Vancouver

Zuñiga-Aguilar E, Ramírez-Fernández O, Botello-Arredondo A. Design and simulation of scaffolds with lattice microstructures for bioprinting bone tissue. Bio-Medical Materials and Engineering. 2024. doi:10.3233/bme-230049

BibTeX
@article{ZuigaAguilar2024,
  author = {Zuñiga-Aguilar, Esmeralda and Ramírez-Fernández, Odin and Botello-Arredondo, Adeodato},
  title = {Design and simulation of scaffolds with lattice microstructures for bioprinting bone tissue},
  journal = {Bio-Medical Materials and Engineering},
  year = {2024},
  doi = {10.3233/bme-230049}
}
Start for free →