EUVIMEDOpdag EUVIMED
Crossref

Numerical investigation on the stability of human upper cervical spine (C1–C3)

Waseem Ur Rahman, Wei Jiang, Guohua Wang, Zhijun Li

Bio-Medical Materials and Engineering · 2022-05-05 · 33 (3) · 169-181

DOI: 10.3233/bme-211247 ↗

At a glance

Journal article in Bio-Medical Materials and Engineering, published on 2022-05-05. Written by Waseem Ur Rahman and 3 co-authors. Institution: School of Mechanical Engineering, Dalian University of Technology, Dalian, China. Major MEDLINE topics: Cervical Vertebrae, Zygapophyseal Joint. Cited 4 times so far (Crossref); 36 references.

AbstractSubjectsBibliografiske oplysningerCiteRelated studies

Abstract (original language)

BACKGROUND: The finite element method (FEM) is an efficient and powerful tool for studying human spine biomechanics. OBJECTIVE: In this study, a detailed asymmetric three-dimensional (3D) finite element (FE) model of the upper cervical spine was developed from the computed tomography (CT) scan data to analyze the effect of ligaments and facet joints on the stability of the upper cervical spine. METHODS: A 3D FE model was validated against data obtained from previously published works, which were performed in vitro and FE analysis of vertebrae under three types of loads, i.e. flexion/extension, axial rotation, and lateral bending. RESULTS: The results show that the range of motion of segment C1–C2 is more flexible than that of segment C2–C3. Moreover, the results from the FE model were used to compute stresses on the ligaments and facet joints of the upper cervical spine during physiological moments. CONCLUSION: The anterior longitudinal ligaments (ALL) and interspinous ligaments (ISL) are found to be the most active ligaments, and the maximum stress distribution is appear on the vertebra C3 superior facet surface under both extension and flexion moments.

Subjects

MeSH terms (MEDLINE)

Cervical VertebraeZygapophyseal JointBiomechanical PhenomenaFinite Element AnalysisHumansRange of Motion, Articular

Author keywords

Asymmetricfacet jointfinite elementligamentsupper cervical spine

Authors and institutions

  • School of Mechanical Engineering, Dalian University of Technology, Dalian, China.
  • Department of Orthopedics, Dalian No.2 People's Hospital, Dalian, China.

Cite

APA

Rahman, W. U., Jiang, W., Wang, G., & Li, Z. (2022). Numerical investigation on the stability of human upper cervical spine (C1–C3). Bio-Medical Materials and Engineering, 33(3), 169-181. https://doi.org/10.3233/bme-211247

Vancouver

Rahman WU, Jiang W, Wang G, Li Z. Numerical investigation on the stability of human upper cervical spine (C1–C3). Bio-Medical Materials and Engineering. 2022;33(3):169-181. doi:10.3233/bme-211247

BibTeX
@article{Rahman2022,
  author = {Rahman, Waseem Ur and Jiang, Wei and Wang, Guohua and Li, Zhijun},
  title = {Numerical investigation on the stability of human upper cervical spine (C1–C3)},
  journal = {Bio-Medical Materials and Engineering},
  year = {2022},
  volume = {33},
  number = {3},
  pages = {169--181},
  doi = {10.3233/bme-211247}
}
Start for free →