Numerical investigation on the stability of human upper cervical spine (C1–C3)
Bio-Medical Materials and Engineering · 05.05.2022 · 33 (3) · 169-181
DOI: 10.3233/bme-211247 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bio-Medical Materials and Engineering, erschienen am 05.05.2022. Verfasst von Waseem Ur Rahman und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Dalian University of Technology, Dalian, China. Hauptthemen laut MEDLINE: Cervical Vertebrae, Zygapophyseal Joint. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 36 Literaturangaben.
Abstract (Originalsprache)
BACKGROUND: The finite element method (FEM) is an efficient and powerful tool for studying human spine biomechanics. OBJECTIVE: In this study, a detailed asymmetric three-dimensional (3D) finite element (FE) model of the upper cervical spine was developed from the computed tomography (CT) scan data to analyze the effect of ligaments and facet joints on the stability of the upper cervical spine. METHODS: A 3D FE model was validated against data obtained from previously published works, which were performed in vitro and FE analysis of vertebrae under three types of loads, i.e. flexion/extension, axial rotation, and lateral bending. RESULTS: The results show that the range of motion of segment C1–C2 is more flexible than that of segment C2–C3. Moreover, the results from the FE model were used to compute stresses on the ligaments and facet joints of the upper cervical spine during physiological moments. CONCLUSION: The anterior longitudinal ligaments (ALL) and interspinous ligaments (ISL) are found to be the most active ligaments, and the maximum stress distribution is appear on the vertebra C3 superior facet surface under both extension and flexion moments.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, Dalian University of Technology, Dalian, China.
- Department of Orthopedics, Dalian No.2 People's Hospital, Dalian, China.
Zitieren
APA
Rahman, W. U., Jiang, W., Wang, G., & Li, Z. (2022). Numerical investigation on the stability of human upper cervical spine (C1–C3). Bio-Medical Materials and Engineering, 33(3), 169-181. https://doi.org/10.3233/bme-211247
Vancouver
Rahman WU, Jiang W, Wang G, Li Z. Numerical investigation on the stability of human upper cervical spine (C1–C3). Bio-Medical Materials and Engineering. 2022;33(3):169-181. doi:10.3233/bme-211247
BibTeX
@article{Rahman2022,
author = {Rahman, Waseem Ur and Jiang, Wei and Wang, Guohua and Li, Zhijun},
title = {Numerical investigation on the stability of human upper cervical spine (C1–C3)},
journal = {Bio-Medical Materials and Engineering},
year = {2022},
volume = {33},
number = {3},
pages = {169--181},
doi = {10.3233/bme-211247}
}
EUVIMED