EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Investigation of Structural Steels with Through‐Thickness Strength Variation

Mustafa Zwain, Thomas J Collins, Marios Theofanous, Konstantinos Skalomenos

ce/papers · 2026-09 · 9 (2-3) · 760-765

DOI: 10.1002/cepa.70563 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ce/papers, online erschienen am 14.09.2026. Verfasst von Mustafa Zwain und 3 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Efficient steel use in modern structures requires targeted strengthening to reduce weight and enhance performance. This study investigates partial thickness induction hardening (IH) with optional tempering as a method to locally increase strength in S355 circular hollow sections (CHS) while limiting ductility loss compared to through thickness hardening. Partial IH heats the CHS via induction but only the outer surface is quenched, forming a martensitic layer while retaining a ferritic core, creating a beneficial property gradient across the thickness. Scanning Electron Microscopy (SEM) quantified martensitic transformation through thickness. CHS with a diameter of 139.7 mm and wall thicknesses of 5, 8, and 10 mm were treated using controlled IH parameters, with selected specimens subsequently tempered at 200 °C and 250 °C for two hours. Tensile tests were conducted to determine yield strength, ultimate strength and strain, with corresponding Vickers hardness profiles. The results demonstrate that partial IH raises yield strength by ~40% and ultimate strength by ~30% relative to untreated material; notably, in some cases this enhancement occurs with no reduction in ductility. Overall, the ductility penalty remains far lower than that associated with full hardening. Tempering at 200 °C and 250 °C slightly lowered strength but had no notable impact. Findings highlight partial IH as a promising approach for locally strengthened CHS.

Zitieren

APA

Zwain, M., Collins, T. J., Theofanous, M., & Skalomenos, K. (2026). Experimental Investigation of Structural Steels with Through‐Thickness Strength Variation. ce/papers, 9(2-3), 760-765. https://doi.org/10.1002/cepa.70563

Vancouver

Zwain M, Collins TJ, Theofanous M, Skalomenos K. Experimental Investigation of Structural Steels with Through‐Thickness Strength Variation. ce/papers. 2026;9(2-3):760-765. doi:10.1002/cepa.70563

BibTeX
@article{Zwain2026,
  author = {Zwain, Mustafa and Collins, Thomas J and Theofanous, Marios and Skalomenos, Konstantinos},
  title = {Experimental Investigation of Structural Steels with Through‐Thickness Strength Variation},
  journal = {ce/papers},
  year = {2026},
  volume = {9},
  number = {2-3},
  pages = {760--765},
  doi = {10.1002/cepa.70563}
}
Kostenlos starten →