EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigating the Flexural Performance of Steel Fibers–Reinforced Lightweight Aggregate Concrete Hollow RC Beams With Low Reinforcement Ratios

Ali Hussein Shaalan, Ahid Zuhair Hamoodi

Journal of Engineering · 2026-01 · 2026 (1)

DOI: 10.1155/je/3319734 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Engineering, online erschienen am 13.07.2026. Verfasst von Ali Hussein Shaalan und 1 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The structural consequences of sectional hollowness under low reinforcement ratios are still not fully understood, despite the fact that lightweight aggregate concrete hollow beams present an appealing way to reduce self‐weight and material consumption. The flexural response of lightweight aggregate reinforced concrete beams (LWARCB) with a 75‐mm longitudinal hollow core and low reinforcement ratios is investigated in this work. Natural gravel was substituted with 60% lightweight expanded clay aggregate (LECA, 4–10 mm) to create structural lightweight concrete with a compressive strength of 30.77 MPa. Four‐point bending tests were conducted on nine beams (200 × 250 × 1500 mm), including solid, hollow, and steel‐fiber–reinforced specimens. The ultimate load capacity of beams with normal and low reinforcement ratios decreased by 5.41% and 8.7%, respectively, when a longitudinal hollow core was introduced. This reduction was accompanied by increased midspan deflection and crack width, indicating a corresponding loss in flexural stiffness. The outcomes revealed that the stiffness and strength loss attributed to the hollow core were significantly reduced by adding 0.5%–1.5% hooked‐end steel fibers. The most notable increases were observed in beams with 1.5% fibers, which successfully mitigated the adverse effect of low reinforcement ratios by yielding higher cracking loads, enhanced flexural capacity, and more stable postcracking response. The study showed that the structural efficiency of hollow LWARCB can be restored and improved with the right amount of fiber.

Zitieren

APA

Shaalan, A. H., & Hamoodi, A. Z. (2026). Investigating the Flexural Performance of Steel Fibers–Reinforced Lightweight Aggregate Concrete Hollow RC Beams With Low Reinforcement Ratios. Journal of Engineering, 2026(1). https://doi.org/10.1155/je/3319734

Vancouver

Shaalan AH, Hamoodi AZ. Investigating the Flexural Performance of Steel Fibers–Reinforced Lightweight Aggregate Concrete Hollow RC Beams With Low Reinforcement Ratios. Journal of Engineering. 2026;2026(1). doi:10.1155/je/3319734

BibTeX
@article{Shaalan2026,
  author = {Shaalan, Ali Hussein and Hamoodi, Ahid Zuhair},
  title = {Investigating the Flexural Performance of Steel Fibers–Reinforced Lightweight Aggregate Concrete Hollow RC Beams With Low Reinforcement Ratios},
  journal = {Journal of Engineering},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/je/3319734}
}
Kostenlos starten →