Application-driven optimization of Ti-6Al-4V alloy via customized heat treatments
Fracture and Structural Integrity · 14.04.2026 · 20 (77) · 71-88
DOI: 10.3221/igf-esis.77.06 ↗Kurz gefasst
Fachartikel in der Zeitschrift Fracture and Structural Integrity, online erschienen am 14.04.2026. Verfasst von Andrea Trombetta und 6 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This paper examines the influence of controlled heat treatments on the mechanical behaviour of Ti-6Al-4V (Grade 5 Titanium alloy) to improve its performance in structural and high performance applications. Ti-6Al-4V is widely used in aerospace, biomedical and automotive components because of its high strength-to-weight ratio and corrosion resistance: however, simultaneously optimizing strength, ductility, fracture toughness and fatigue resistance remains challenging. Because the alloy is highly sensitive to thermo-mechanical history, heat treatment provides an effective means of tailoring its mechanical response. Four microstructural conditions were examined: (i) annealed, A, (ii) solution-treated and aged, STA, (iii) β-annealed, BA, and (iv) β-solution-treated and overaged, BSTOA. Optical and scanning electron microscopy were used to characterize the resulting microstructures and tensile, hardness, impact strength, fracture mechanics and fatigue tests to determine the respective mechanical properties. A condition exhibited the highest ductility, whereas the STA treatment produced the greatest strength and hardness; BA condition improved fracture toughness, while BSTOA treatment provided the highest high cycle fatigue limit. These findings demonstrated that appropriate selection of the thermal treatment process can significantly enhance the mechanical performance of Grade 5 Titanium alloy for advanced engineering applications.
Zitieren
APA
Trombetta, A., Certini, C., Pasini, L. M., Boniardi, M. V., Rosaspina, L., Scabini, E., & Casaroli, A. (2026). Application-driven optimization of Ti-6Al-4V alloy via customized heat treatments. Fracture and Structural Integrity, 20(77), 71-88. https://doi.org/10.3221/igf-esis.77.06
Vancouver
Trombetta A, Certini C, Pasini LM, Boniardi MV, Rosaspina L, Scabini E, et al. Application-driven optimization of Ti-6Al-4V alloy via customized heat treatments. Fracture and Structural Integrity. 2026;20(77):71-88. doi:10.3221/igf-esis.77.06
BibTeX
@article{Trombetta2026,
author = {Trombetta, Andrea and Certini, Cesare and Pasini, Luca Marco and Boniardi, Marco Virginio and Rosaspina, Luca and Scabini, Edoardo and Casaroli, Andrea},
title = {Application-driven optimization of Ti-6Al-4V alloy via customized heat treatments},
journal = {Fracture and Structural Integrity},
year = {2026},
volume = {20},
number = {77},
pages = {71--88},
doi = {10.3221/igf-esis.77.06}
}
EUVIMED