EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Reducing Cycle Time in the Manufacturing Process of Circular Pattern Interpolar Products (CPIP) Using Special Fixtures on a 3-Axis CNC Machine

Muhammad Luthfi Sonjaya, Massriyady Massaguni, Muh. Nurul Haq Amaluddin

INTEK: Jurnal Penelitian · 2023

DOI: 10.31963/intek.v10i2.4439 ↗

Kurz gefasst

Fachartikel in der Zeitschrift INTEK: Jurnal Penelitian, 2023. Verfasst von Muhammad Luthfi Sonjaya und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This research focuses on the design of fixture aids to support the manufacturing process of Circular Pattern Interpolation Products (CPIP), such as disk brake components, flanges, turbine disk runners, and other plate components with circular feeding patterns in the 3-Axis CNC machining process. The objective of this study is to achieve more efficient CPIP production times on 3-Axis CNC machines. The research methodology employed a design and build approach, involving the design of fixture aids, fabrication, and testing during the production of turbine disk runners on a 3-Axis CNC machine. This was done by comparing the initial workpiece setup time and the workpiece clamping transfer time using CPIP production aids versus not using CPIP production aids. The results showed that the designed CPIP Fixture significantly reduced the CPIP manufacturing Cycle Time, with a reduction of 63.11% in the initial workpiece setup time and 83.55% during the clamping transfer process.

Zitieren

APA

Sonjaya, M. L., Massaguni, M., & Amaluddin, M. N. H. (2023). Reducing Cycle Time in the Manufacturing Process of Circular Pattern Interpolar Products (CPIP) Using Special Fixtures on a 3-Axis CNC Machine. INTEK: Jurnal Penelitian. https://doi.org/10.31963/intek.v10i2.4439

Vancouver

Sonjaya ML, Massaguni M, Amaluddin MNH. Reducing Cycle Time in the Manufacturing Process of Circular Pattern Interpolar Products (CPIP) Using Special Fixtures on a 3-Axis CNC Machine. INTEK: Jurnal Penelitian. 2023. doi:10.31963/intek.v10i2.4439

BibTeX
@article{Sonjaya2023,
  author = {Sonjaya, Muhammad Luthfi and Massaguni, Massriyady and Amaluddin, Muh. Nurul Haq},
  title = {Reducing Cycle Time in the Manufacturing Process of Circular Pattern Interpolar Products (CPIP) Using Special Fixtures on a 3-Axis CNC Machine},
  journal = {INTEK: Jurnal Penelitian},
  year = {2023},
  doi = {10.31963/intek.v10i2.4439}
}
Kostenlos starten →