EUVIMEDEUVIMED entdecken
Crossref

Numerical Analysis of Outlet Number Effects on Temperature Distribution in a Briquette Oven Using CFD

Alviani Hesthi Permata Ningtyas, Siti Duratun Rosady, Muhammad Wildanus Sholih

Logic : Jurnal Rancang Bangun dan Teknologi · 31.07.2026 · 26 (2) · 157-166

DOI: 10.31940/logic.v26i2.157-166 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Logic : Jurnal Rancang Bangun dan Teknologi, online erschienen am 31.07.2026. Verfasst von Alviani Hesthi Permata Ningtyas und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The performance of briquette drying systems is strongly influenced by airflow distribution and thermal uniformity within the drying chamber, which are governed by outlet configuration and internal flow patterns. However, limited studies have systematically quantified the effect of exhaust outlet arrangements on the coupled heat transfer and fluid flow behavior in industrial-scale briquette ovens. This study aims to numerically investigate the influence of single-, double-, and four-outlet configurations on airflow characteristics, temperature distribution, and overall thermal performance of a briquette drying oven. A three-dimensional geometric model representing the combustion chamber, drying chamber, and briquette racks was developed and analyzed using Computational Fluid Dynamics (CFD). Steady-state simulations were performed in ANSYS Fluent employing the standard k–ε turbulence model, with air properties, inlet velocity (9.97 m/s), and thermal boundary conditions defined based on operational data. The results reveal that outlet configuration significantly affects flow recirculation intensity and temperature uniformity across the briquette racks. The four-outlet configuration produced the most homogeneous airflow distribution and reduced thermal gradients, thereby enhancing convective heat transfer effectiveness compared to single- and double-outlet designs. Conversely, the single-outlet case exhibited pronounced recirculation zones and localized temperature variations, potentially leading to uneven drying. These findings demonstrate that optimizing outlet arrangement is a critical design parameter for improving drying efficiency and energy utilization in briquette oven systems, providing a validated numerical framework for future thermal system optimization.

Zitieren

APA

Ningtyas, A. H. P., Rosady, S. D., & Sholih, M. W. (2026). Numerical Analysis of Outlet Number Effects on Temperature Distribution in a Briquette Oven Using CFD. Logic : Jurnal Rancang Bangun dan Teknologi, 26(2), 157-166. https://doi.org/10.31940/logic.v26i2.157-166

Vancouver

Ningtyas AHP, Rosady SD, Sholih MW. Numerical Analysis of Outlet Number Effects on Temperature Distribution in a Briquette Oven Using CFD. Logic : Jurnal Rancang Bangun dan Teknologi. 2026;26(2):157-166. doi:10.31940/logic.v26i2.157-166

BibTeX
@article{Ningtyas2026,
  author = {Ningtyas, Alviani Hesthi Permata and Rosady, Siti Duratun and Sholih, Muhammad Wildanus},
  title = {Numerical Analysis of Outlet Number Effects on Temperature Distribution in a Briquette Oven Using CFD},
  journal = {Logic : Jurnal Rancang Bangun dan Teknologi},
  year = {2026},
  volume = {26},
  number = {2},
  pages = {157--166},
  doi = {10.31940/logic.v26i2.157-166}
}
Kostenlos starten →