EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Effect of TiO₂ Nanoparticle Incorporation on the Hydrophilicity and Stability of NIPS-Fabricated PVDF Membranes for Methylene Blue Removalthylene Blue Removal

Andera Lestari, Ian Kurniawan, Dui Yanto Rahman

Jurnal Penelitian Fisika dan Terapannya (JUPITER) · 31.07.2026 · 8 (1) · 18-28

DOI: 10.31851/bdqahj97 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Penelitian Fisika dan Terapannya (JUPITER), online erschienen am 31.07.2026. Verfasst von Andera Lestari und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Water pollution resulting from the presence of synthetic dyes such as Methylene Blue has become a serious environmental concern due to its high stability, toxicity, and resistance to natural degradation. Membrane-based separation technology is considered a promising approach for treating colored wastewater; however, the application of Polyvinylidene Fluoride (PVDF) membranes is still limited by their inherent hydrophobic nature, which leads to fouling and a decline in filtration performance during operation. This study aims to investigate the effect of varying concentrations of titanium dioxide (TiO₂) nanoparticles on the hydrophilicity and operational stability of PVDF membranes fabricated via the Non-Solvent Induced Phase Separation (NIPS) method. PVDF–TiO₂ composite membranes were prepared with TiO₂ loadings of 0%, 5%, 10%, and 15% relative to the mass of PVDF. Membrane hydrophilicity was characterized using contact angle measurements, while membrane stability was evaluated through repeated filtration tests using a Methylene Blue solution. The results demonstrate that the incorporation of TiO₂ significantly enhances membrane hydrophilicity, as indicated by a reduction in contact angle compared to pristine PVDF membranes. The membrane containing 5% TiO₂ exhibited the highest hydrophilicity, reflected by the lowest contact angle value. Improved hydrophilicity contributed to enhanced operational stability by reducing fouling tendency during the filtration process. However, excessive TiO₂ loading led to nanoparticle agglomeration, which diminished the effectiveness of hydrophilicity enhancement. Overall, the findings indicate that PVDF membrane modification with TiO₂ is an effective strategy to improve hydrophilicity and maintain membrane performance stability in Methylene Blue removal applications.

Zitieren

APA

Lestari, A., Kurniawan, I., & Rahman, D. Y. (2026). Effect of TiO₂ Nanoparticle Incorporation on the Hydrophilicity and Stability of NIPS-Fabricated PVDF Membranes for Methylene Blue Removalthylene Blue Removal. Jurnal Penelitian Fisika dan Terapannya (JUPITER), 8(1), 18-28. https://doi.org/10.31851/bdqahj97

Vancouver

Lestari A, Kurniawan I, Rahman DY. Effect of TiO₂ Nanoparticle Incorporation on the Hydrophilicity and Stability of NIPS-Fabricated PVDF Membranes for Methylene Blue Removalthylene Blue Removal. Jurnal Penelitian Fisika dan Terapannya (JUPITER). 2026;8(1):18-28. doi:10.31851/bdqahj97

BibTeX
@article{Lestari2026,
  author = {Lestari, Andera and Kurniawan, Ian and Rahman, Dui Yanto},
  title = {Effect of TiO₂ Nanoparticle Incorporation on the Hydrophilicity and Stability of NIPS-Fabricated PVDF Membranes for Methylene Blue Removalthylene Blue Removal},
  journal = {Jurnal Penelitian Fisika dan Terapannya (JUPITER)},
  year = {2026},
  volume = {8},
  number = {1},
  pages = {18--28},
  doi = {10.31851/bdqahj97}
}
Kostenlos starten →