EUVIMEDEUVIMED entdecken
Crossref

Design and Fabrication of High‐Performance Polymeric Membranes Based on PTh/ZnO–PVDF for Effective Methylene Blue Removal

Muhammad Mohsin, Zulfiqar Ahmad Rehan, Hirra Anjum, Huzaifa Rushan Aziz, Muhammad Zahid, M. Saad Mushtaq, Warda Irum Mubarak

ChemistrySelect · 2026-05 · 11 (17)

DOI: 10.1002/slct.73353 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ChemistrySelect, online erschienen am 28.04.2026. Verfasst von Muhammad Mohsin und 6 weiteren Autor:innen. Die Arbeit nennt 45 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wastewater from textile dyes remains a significant environmental concern. The demand for sustainable, efficient, and environmentally friendly treatment technologies has accelerated the development of advanced filtration systems. Among these, polymeric membranes are the most effective approach due to their ease of fabrication, cost‐effectiveness, and excellent selectivity for Methylene Blue (MB) remediation. In this study, PTh/ZnO‐based PVDF membranes were fabricated using the phase inversion technique. The prepared membranes (PM‐1 to PM‐5) were characterized by Fourier Transform Infrared Spectroscopy (FTIR), X‐ray Diffraction (XRD), Scanning Electron Microscopy (SEM), tensile testing, and contact angle measurement. The PM‐5 membrane achieved 85% porosity owing to nanocomposite‐induced interconnected pore formation. Moreover, the contact angle decreased from PM1‐PM5, indicating enhanced hydrophilicity driven by hydroxylated ZnO and surface roughness. Membrane performance was evaluated through photocatalytic degradation of a representative dye pollutant, exhibiting efficiencies of 91%, 95%, and 97% for PM‐3, PM‐4, and PM‐5, respectively. In comparison, pristine PVDF exhibited limited photocatalytic activity, achieving only 32% MB degradation. Density functional theory (DFT) calculations further revealed enhanced electronic interactions and charge transport within the PTh/ZnO–PVDF composite, supporting its improved photocatalytic activity. These findings highlight PTh/ZnO–PVDF membranes, offering a viable route toward clean water technologies and practical applications in dye‐intensive industries.

Zitieren

APA

Mohsin, M., Rehan, Z. A., Anjum, H., Aziz, H. R., Zahid, M., Mushtaq, M. S., & Mubarak, W. I. (2026). Design and Fabrication of High‐Performance Polymeric Membranes Based on PTh/ZnO–PVDF for Effective Methylene Blue Removal. ChemistrySelect, 11(17). https://doi.org/10.1002/slct.73353

Vancouver

Mohsin M, Rehan ZA, Anjum H, Aziz HR, Zahid M, Mushtaq MS, et al. Design and Fabrication of High‐Performance Polymeric Membranes Based on PTh/ZnO–PVDF for Effective Methylene Blue Removal. ChemistrySelect. 2026;11(17). doi:10.1002/slct.73353

BibTeX
@article{Mohsin2026,
  author = {Mohsin, Muhammad and Rehan, Zulfiqar Ahmad and Anjum, Hirra and Aziz, Huzaifa Rushan and Zahid, Muhammad and Mushtaq, M. Saad and Mubarak, Warda Irum},
  title = {Design and Fabrication of High‐Performance Polymeric Membranes Based on PTh/ZnO–PVDF for Effective Methylene Blue Removal},
  journal = {ChemistrySelect},
  year = {2026},
  volume = {11},
  number = {17},
  doi = {10.1002/slct.73353}
}
Kostenlos starten →