Treating Drill Cuttings Waste with Oil Contamination by Microwave Treatment then by Earthworms Technique
Iraqi Journal of Chemical and Petroleum Engineering · 30.03.2021 · 22 (1) · 21-27
DOI: 10.31699/ijcpe.2021.1.3 ↗Kurz gefasst
Fachartikel in der Zeitschrift Iraqi Journal of Chemical and Petroleum Engineering, online erschienen am 30.03.2021. Verfasst von Ahmed Ameen Khdair und 1 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
In this research paper, two techniques were used to treat the drill cuttings resulting from the oil-based drilling fluid. The drill cuttings were taken from the southern Rumaila fields which prepared for testing and fixed with 100 gm per sample and contaminated with two types of crude oil, one from Rumaila oilfields with Sp.gr of 0.882 and the other from the eastern Baghdad oilfield with Sp.gr of 0.924 besides contamination levels of 10% and 15% w/w in mass. Samples were treated first with microwave with a power applied of 540 & 180 watts as well as a time of 50 minutes. It was found that the results reached below 1% w/w in mass, except for two samples they reached below 1.5% w/w in mass. Then, the sample of 1.41% w/w in mass, which has the highest contamination level after microwave treatment, was treated on three groups of earthworms. After the appropriate conditions, samples were prepared for treating by earthworms and for an incubation period of 21 days, the results highlighted the effectiveness of the succession process by reaching concentrations below 0.92%, 0.65%, and 0.42% w/w in mass.
Zitieren
APA
Khdair, A. A., & Al-Haleem, A. A. (2021). Treating Drill Cuttings Waste with Oil Contamination by Microwave Treatment then by Earthworms Technique. Iraqi Journal of Chemical and Petroleum Engineering, 22(1), 21-27. https://doi.org/10.31699/ijcpe.2021.1.3
Vancouver
Khdair AA, Al-Haleem AA. Treating Drill Cuttings Waste with Oil Contamination by Microwave Treatment then by Earthworms Technique. Iraqi Journal of Chemical and Petroleum Engineering. 2021;22(1):21-27. doi:10.31699/ijcpe.2021.1.3
BibTeX
@article{Khdair2021,
author = {Khdair, Ahmed Ameen and Al-Haleem, Ayad A.},
title = {Treating Drill Cuttings Waste with Oil Contamination by Microwave Treatment then by Earthworms Technique},
journal = {Iraqi Journal of Chemical and Petroleum Engineering},
year = {2021},
volume = {22},
number = {1},
pages = {21--27},
doi = {10.31699/ijcpe.2021.1.3}
}
EUVIMED