EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Heat Transfer Characteristics of Oil-Based Drill Cuttings in Thermal Desorption Chambers

Maoren Wang, Yucheng Liu

Processes · 02.05.2023 · 11 (5) · 1374

DOI: 10.3390/pr11051374 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 02.05.2023. Verfasst von Maoren Wang und 1 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermal desorption technologies have been extensively applied for the disposal of oil-based drill cuttings. Fluent-software-based phase changes in multiphase flow models within thermal desorption chamber temperature field simulations were examined to study the effects of oil-based drill cuttings fluid content and feed rates, nitrogen content, thermal desorption chamber length and diameter, and extraction tube position on the thermal desorption chamber and temperature field. Our results demonstrate that these factors had a considerable influence on the temperature field of the chamber, with the liquid content of the oil-based drill cuttings having the greatest influence. The heat transfer process was enhanced by appropriately increasing the diameter and length of the chamber and reasonably setting the extraction tube. When the chamber length was insufficient, there was a risk that the outlet temperature would be extremely low and the oil content of the residue would exceed the standard. The higher the feeding and nitrogen entering rates of the oil cuttings, the higher the liquid content of the oil cuttings and the lower the temperature in the chamber. Based on the heat transfer characteristics of the oil-based drill cuttings in the thermal desorption chamber, this study provides a theoretical basis for the design and application of oil-bearing cutting thermal desorption devices.

Zitieren

APA

Wang, M., & Liu, Y. (2023). Heat Transfer Characteristics of Oil-Based Drill Cuttings in Thermal Desorption Chambers. Processes, 11(5), 1374. https://doi.org/10.3390/pr11051374

Vancouver

Wang M, Liu Y. Heat Transfer Characteristics of Oil-Based Drill Cuttings in Thermal Desorption Chambers. Processes. 2023;11(5):1374. doi:10.3390/pr11051374

BibTeX
@article{Wang2023,
  author = {Wang, Maoren and Liu, Yucheng},
  title = {Heat Transfer Characteristics of Oil-Based Drill Cuttings in Thermal Desorption Chambers},
  journal = {Processes},
  year = {2023},
  volume = {11},
  number = {5},
  pages = {1374},
  doi = {10.3390/pr11051374}
}
Kostenlos starten →