EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Effect of Curvature on the Thermal-Hydraulic Performance of Serpentine Battery Cooling Channels

Teguh Hady Ariwibowo, Lucky Pradigta Setiya Raharja, Satworo Adiwidodo, Fengky Adie Perdana, Nila Alia, Burniadi Moballa, Muh. Anis Mustaghfirin, Arya Rafi Abrari, Muhammad Aghist Fitrony, Charitsma Tsani, Probo Yekti Salsabilla Adelwise, Putri Dwi Imandini

Automotive Experiences · 12.06.2026 · 9 (2)

DOI: 10.31603/ae.15222 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Automotive Experiences, online erschienen am 12.06.2026. Verfasst von Teguh Hady Ariwibowo und 11 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Efficient battery thermal management systems (BTMS) are essential for ensuring the safety and performance of lithium-ion batteries in electric vehicles. This study numerically investigates the influence of serpentine channel curvature on the thermal and hydraulic characteristics of a liquid-cooled prismatic battery module. Four channel designs were evaluated: a base case and three serpentine configurations with curvature values of 0.075 mm⁻¹, 0.1 mm⁻¹, and 0.15 mm⁻¹. Simulations were conducted under steady-state and transient conditions with discharge rates of 0.5C–2C and mass flow rates of 2.41 × 10⁻³ – 3.61 × 10⁻² kg/s. The results show that higher curvature and mass flow rates reduce maximum battery temperature and improve temperature uniformity, but at the expense of increased pressure drop and pumping power. At 3.61 × 10⁻² kg/s, the base-case channel exhibited a 28% increase in pressure drop compared to 2.41 × 10⁻² kg/s, while the 0.15 mm⁻¹ channel recorded up to a 60% rise under the same condition. Transient analysis revealed that curved channels enhanced heat dissipation, achieving up to 8.56% higher cooling performance than the base case. These findings highlight the trade-off between thermal improvement and hydraulic penalty, providing valuable guidance for optimizing liquid-cooled BTMS in electric vehicle applications.

Zitieren

APA

Ariwibowo, T. H., Raharja, L. P. S., Adiwidodo, S., Perdana, F. A., Alia, N., Moballa, B., Mustaghfirin, M. A., Abrari, A. R., Fitrony, M. A., Tsani, C., Adelwise, P. Y. S., & Imandini, P. D. (2026). Effect of Curvature on the Thermal-Hydraulic Performance of Serpentine Battery Cooling Channels. Automotive Experiences, 9(2). https://doi.org/10.31603/ae.15222

Vancouver

Ariwibowo TH, Raharja LPS, Adiwidodo S, Perdana FA, Alia N, Moballa B, et al. Effect of Curvature on the Thermal-Hydraulic Performance of Serpentine Battery Cooling Channels. Automotive Experiences. 2026;9(2). doi:10.31603/ae.15222

BibTeX
@article{Ariwibowo2026,
  author = {Ariwibowo, Teguh Hady and Raharja, Lucky Pradigta Setiya and Adiwidodo, Satworo and Perdana, Fengky Adie and Alia, Nila and Moballa, Burniadi and Mustaghfirin, Muh. Anis and Abrari, Arya Rafi and Fitrony, Muhammad Aghist and Tsani, Charitsma and Adelwise, Probo Yekti Salsabilla and Imandini, Putri Dwi},
  title = {Effect of Curvature on the Thermal-Hydraulic Performance of Serpentine Battery Cooling Channels},
  journal = {Automotive Experiences},
  year = {2026},
  volume = {9},
  number = {2},
  doi = {10.31603/ae.15222}
}
Kostenlos starten →