EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Investigation on Thermal Performance of a Battery Pack Cooled by Refrigerant R134a in Ribbed Cooling Channels

Tieyu Gao, Jiadian Wang, Haonan Sha, Hao Yang, Chenguang Lai, Xiaojin Fu, Guangtao Zhai, Junxiong Zeng

Energies · 19.02.2025 · 18 (4) · 1011

DOI: 10.3390/en18041011 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 19.02.2025. Verfasst von Tieyu Gao und 7 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Research Program of Chongqing Municipal Education Commission, Chongqing Provincial Natural Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study numerically investigates the thermal performance of a refrigerant-based battery thermal management system (BTMS) under various operating conditions. A validated numerical model is used to examine the effects of cooling channel rib configurations (rib spacing and rib angles) and refrigerant parameters (mass flow rate and saturation temperature) on battery thermal behavior. Additionally, the impact of discharge C-rates is analyzed. The results show that a rib spacing of 11 mm and a rib angle of 60° reduce the maximum battery temperature by 0.8 °C (cooling rate of 2%) and improve temperature uniformity, though at the cost of a 130% increase in pressure drop. Increasing the refrigerant mass flow rate lowers the maximum temperature by up to 10%, but its effect on temperature uniformity diminishes beyond 20 kg/h. A lower saturation temperature enhances cooling but increases internal temperature gradients, while a higher saturation temperature improves uniformity at the expense of a slightly higher maximum temperature. Under high discharge rates (12C), the system’s cooling capacity becomes limited, leading to significant temperature rises. These findings provide insights that can aid in optimizing BTMS design to balance cooling performance, energy efficiency, and temperature uniformity.

Förderung

  • Science and Technology Research Program of Chongqing Municipal Education Commission
  • Chongqing Provincial Natural Science Foundation

Zitieren

APA

Gao, T., Wang, J., Sha, H., Yang, H., Lai, C., Fu, X., Zhai, G., & Zeng, J. (2025). Investigation on Thermal Performance of a Battery Pack Cooled by Refrigerant R134a in Ribbed Cooling Channels. Energies, 18(4), 1011. https://doi.org/10.3390/en18041011

Vancouver

Gao T, Wang J, Sha H, Yang H, Lai C, Fu X, et al. Investigation on Thermal Performance of a Battery Pack Cooled by Refrigerant R134a in Ribbed Cooling Channels. Energies. 2025;18(4):1011. doi:10.3390/en18041011

BibTeX
@article{Gao2025,
  author = {Gao, Tieyu and Wang, Jiadian and Sha, Haonan and Yang, Hao and Lai, Chenguang and Fu, Xiaojin and Zhai, Guangtao and Zeng, Junxiong},
  title = {Investigation on Thermal Performance of a Battery Pack Cooled by Refrigerant R134a in Ribbed Cooling Channels},
  journal = {Energies},
  year = {2025},
  volume = {18},
  number = {4},
  pages = {1011},
  doi = {10.3390/en18041011}
}
Kostenlos starten →