TDI-Based Urethane Diacrylate Reinforced Silicon-Acrylate Resins for LCD 3D Printing
El-Cezeri Fen ve Mühendislik Dergisi · 31.01.2026 · 13 (1) · 49-58
DOI: 10.31202/ecjse.1633913 ↗Kurz gefasst
Fachartikel in der Zeitschrift El-Cezeri Fen ve Mühendislik Dergisi, online erschienen am 31.01.2026. Verfasst von Emre Akın und 1 weiteren Autor:innen. Die Arbeit nennt 36 Literaturangaben.
Abstract (Originalsprache)
In this study, silicon acrylate resins were formulated using a 1:1 ratio of silicon diacrylate and dipropylene glycol diacrylate (DPGDA) as the control sample (Si-HTH0), previously tested in earlier work. To enhance mechanical properties, a novel diacrylate monomer, HEMA-terminated TDI-based urethane (HTH), was synthesized by reacting toluene diisocyanate (TDI) with 2-hydroxyethyl methacrylate (HEMA). The synthesized monomer was blended with DPGDA at varying concentrations (20–100%) and integrated into the silicon diacrylate resin. Mechanical characterization revealed significant improvements in tensile strength, Young’s modulus, impact resistance, and hardness. At 60% HTH (Si-HTH60), the material exhibited the best balance of properties, with a 393% increase in ultimate tensile strength, 11.87% elongation at break, and 3.7 kJ/m² impact resistance. SEM analysis confirmed that Si-HTH60 displayed the most ductile fracture morphology among the tested samples, characterized by rougher surfaces, a distinct river-like pattern, and deep fractures, indicating enhanced energy absorption. In contrast, the 100% HTH sample exhibited a unique morphology with a fibrous and slightly porous structure, leading to the highest tensile strength and modulus, though without superior impact resistance. These findings highlight HTH’s effectiveness in enhancing silicon acrylate-based resins for advanced DLP/LCD 3D printing applications.
Zitieren
APA
Akın, E., & Çakır, M. (2026). TDI-Based Urethane Diacrylate Reinforced Silicon-Acrylate Resins for LCD 3D Printing. El-Cezeri Fen ve Mühendislik Dergisi, 13(1), 49-58. https://doi.org/10.31202/ecjse.1633913
Vancouver
Akın E, Çakır M. TDI-Based Urethane Diacrylate Reinforced Silicon-Acrylate Resins for LCD 3D Printing. El-Cezeri Fen ve Mühendislik Dergisi. 2026;13(1):49-58. doi:10.31202/ecjse.1633913
BibTeX
@article{Akn2026,
author = {Akın, Emre and Çakır, Mustafa},
title = {TDI-Based Urethane Diacrylate Reinforced Silicon-Acrylate Resins for LCD 3D Printing},
journal = {El-Cezeri Fen ve Mühendislik Dergisi},
year = {2026},
volume = {13},
number = {1},
pages = {49--58},
doi = {10.31202/ecjse.1633913}
}
EUVIMED