Impact of surface roughness on the adhesion strength of PVA/eggshell-derived hydroxyapatite coatings on AISI 316L substrates
Jurnal Polimesin · 26.04.2026 · 24 (2) · 281
DOI: 10.30811/jpl.v24i2.8690 ↗Kurz gefasst
Fachartikel in der Zeitschrift Jurnal Polimesin, online erschienen am 26.04.2026. Verfasst von Mochamad Arif Irfa'i und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0).
Abstract (Originalsprache)
This study investigates the effect of AISI 316L surface roughness on the adhesion Poly Vinyl Alcohol (PVA) and eggshell-derived Hydroxyapatite (HA) coatings applied via slurry spraying. The surfaces were modified by the sandblasting method resulting in a maximum roughness of 4.803 µm using 16-30 mesh SiO2 as sandblasting media. Reducing SiO2 particle size to 30-60 mesh and subsequently 60-80 mesh, gradually reduces the surface roughness to 3.431 µm and 1.712 µm, proving that smaller abrasive particles result in a smoother surface. The slurry spraying process was then done using 27:73 mass-based mixture of HA and 3% PVA solution in water. Results revealed that while sandblasting significantly altered substrate topography, the resulting coatings remained dense and pore-free with consistent thickness across all roughness levels, while maximum adhesive strength of 4.09 MPa based on ASTM D4541 method was observed in the specimen sandblasted with 30-60 mesh SiO2, corresponding to a Ra value of 3.43 µm. Utilizing sustainable eggshell-derived HA provides a bioactive, cost-effective coating material that achieves high inter facial adhesion on AISI 316L, offering a mechanically stable and affordable solution for the development of next-generation orthopedic implants.
Zitieren
APA
Irfa'i, M. A., Suherman, S., & Firdaus, A. F. M. (2026). Impact of surface roughness on the adhesion strength of PVA/eggshell-derived hydroxyapatite coatings on AISI 316L substrates. Jurnal Polimesin, 24(2), 281. https://doi.org/10.30811/jpl.v24i2.8690
Vancouver
Irfa'i MA, Suherman S, Firdaus AFM. Impact of surface roughness on the adhesion strength of PVA/eggshell-derived hydroxyapatite coatings on AISI 316L substrates. Jurnal Polimesin. 2026;24(2):281. doi:10.30811/jpl.v24i2.8690
BibTeX
@article{Irfai2026,
author = {Irfa'i, Mochamad Arif and Suherman, Suherman and Firdaus, Achmad Fadjar Maulana},
title = {Impact of surface roughness on the adhesion strength of PVA/eggshell-derived hydroxyapatite coatings on AISI 316L substrates},
journal = {Jurnal Polimesin},
year = {2026},
volume = {24},
number = {2},
pages = {281},
doi = {10.30811/jpl.v24i2.8690}
}
EUVIMED